2. Put the watch bracelet upright and put the side with the big pinhole outside.
3. Then put the watch chain on the thimble, aim at the pinhole, rotate the thimble of the thimble, and eject the thimble connected with the watch chain.
4. After cutting the whole, put the part to be cut on the ejector according to the above method, repeat the same action, and select the number of sections to be cut according to the actual size. Here, take the part to be deleted as an example.
5. Disassemble a section and reassemble the watch chain, first connect it with a connecting pin, and then put the connected one on the ejector. Put the connected bracelet on the thimble in the opposite direction, turn the thimble, and push the connected thimble firmly into the bracelet. Remember not to use too much force, or you may puncture.
6. Finally, after the above methods are checked correctly, the watch disassembly work is completed, and the number of sections of the watch can be appropriately disassembled according to your own needs, thus solving the problem that the watch chain is too long.