Octagonal treatment refers to the four corner shapes on the floor drain interface, usually rectangular or square, and each corner is divided into two shapes with 45-degree angles, which looks like a figure of eight. The reason for dealing with the splayed corner problem is that many floor drains use right-angle joints instead of rounded corners, which is easy to accumulate water and scale, and even easy to breed bacteria, affecting the health of the whole family.
Therefore, it is necessary to deal with the splayed angle of floor drain reasonably. Here are some ways:
1. fillet processing: This method treats the right angle as a fillet. During the construction, the constructor can be appointed to conduct circular arc processing on the four corners of the floor drain interface, which can easily solve the problems of water accumulation and bacteria in the eight corners.
2. Foam filling: It is a simple and effective method to fill the octagon of floor drain with foam, which can prevent water accumulation and bacterial growth. First, clean the right-angle part on the floor drain interface, then fill the right-angle part of the octagon with anhydrous foam glue, and then cut off the excess foam after drying.
3. Make an arc joint: This method is relatively simple, and only the floor drain joint needs to be made into an arc during construction, thus avoiding the problem of eight angles.
In a word, it is very important to deal with the octagonal problem of floor drain, which can effectively avoid water accumulation and bacterial growth and ensure the sanitary environment. When decorating, we should pay attention to this problem before construction, and then carry out professional and standardized operations during construction. Only in this way can the family's sanitary environment be healthier.