How to deal with the joint of floor tile

After the floor tile is laid, there are three ways to deal with brick joints, as follows:

The first is to let nature take its course, that is, after paving, do not do anything. This combination therapy was common before 20 15.

Natural joints are easy to hide evil and shelter evil, and now they have been eliminated.

The second way is to use sealant, which is mostly white. Because of the large particles of caulking material, it is easy to be polluted after caulking. After a long time, the white joint filler becomes dark gray or black. This combination therapy was accepted by the general public before 20 15.

The structural density of caulking agent is not enough and it is easy to be polluted.

The third way to deal with the joint of floor tiles is to make a beautiful joint agent at the gap. As a caulking agent, there are clear requirements for the joint width of floor tiles, that is, the joint width of floor tiles should not be less than 2㎜, so the caulking agent made in this way is more atmospheric. Moreover, when the caulking agent reaches a certain amount, the strength can be higher, so it is more pollution-resistant, so it is favored by the majority of decoration households. At present, almost all the joints of floor tiles have been beautifully stitched and the effect is very good.

The sealant has high structural density, pollution resistance and elegant appearance.