The simplest method of traditional bleaching adjustment

The simplest method of traditional float adjustment is as follows:

Float fishing adjustment is a required course for every fisherman. The float is the eyes of us fishermen, and the game of fishing is the fisherman's control of the underwater fish situation through the signal transmitted by the float. Whether the fish mouth can be caught more accurately mainly depends on whether the fisherman can adjust the proportion of the float properly.

As the saying goes, "If the water is clear, there will be no fish." Fish usually hide in water bodies with poor visibility or deep water. Therefore, if you want to catch fish well and know clearly when the fish takes a bite, you can only understand the situation of the fish underwater by observing the changes in the state of the float.

People who know how to adjust the float can often adjust the float very accurately. Every move of the fish at the bottom of the water can be reflected more accurately and timely on the float. They can often judge the float through the feedback of the float signal. Once you find out whether it is a fish mouth, you can raise the pole to stab the fish as soon as possible, which will make fishing easier.

However, drift adjustment is often difficult for novices to understand. Everyone may know the four-step bleaching method, because it is the basis and steps of bleaching. But once it comes to adjusting how much fishing is good, and how heavy the hook and bait are, the novices will immediately become confused. Every time they adjust the float, they will be entangled in whether to adjust the fishing height higher, the fishing height lower, or how many fish to adjust. How good.

The more I read, the more entangled I become. Everyone has different opinions. He says it is better to adjust it this way, he says it is better to adjust it that way. In fact, they are all right. The key is whether you can understand them in this way or that. The meaning of tune.

To give a simple example: we adjust four meshes to fish two meshes. Everyone uses the same floating hook, but the bait used is different. If you use rubbing bait, one hook may lie on the bottom and one hook touches the bottom; if you use pull bait, one hook may touch the bottom and one hook may leave the bottom; if you use earthworms and red worms, both hooks may be off the bottom.

This is because the proportion of bait is different. Therefore, whether you raise the fishing bottom or lower the fishing height, it does not mean that you are smart or blunt. Whether you are smart or blunt, your hook weight and bait weight are both critical.

So how can a novice adjust the drift best?

As a novice, I basically don’t have the concepts of hook weight and bait weight when I first learn to adjust float. Some are just steps to adjust the float. The concern is whether it is better to raise the fishing height or lower the fishing height. This is also what every novice has in mind. But because there is no concept of hook weight and bait weight, I chose to adjust the mesh higher when I first started fishing. As a result, the bait could not be pressed down lightly, and I couldn't catch the fish with a lower mesh, and I still got stuck after a long time.

As soon as I started fishing, I chose to lower the hook and fish with a higher hook, and the hook weight was light. As a result, the eight-shaped ring was all the way down, and I didn’t know if the hook was dull. For novices, if they want to avoid such a phenomenon, it is best to choose to fish as many meshes as possible with the hook, that is, adjust as many meshes as possible.

What are the advantages of adjusting fishing numbers?

Use the hook to adjust the number of meshes and catch as many meshes as possible. This is a drift adjustment method that can avoid over-activation or over-dullness at first. And because the adjusting mesh is the same as the fishing mesh, it has nothing to do with the amount of lead you eat on the float and the thickness of the floating tail. Therefore, by adjusting the number of fish, you no longer have to worry about whether I am using a float with a hollow tail or a heart-shaped float. There may be over-reflection or over-dullness.