Can the camber of 202 1 crv rear wheel be adjusted?

202 1 crv rear wheel camber can be adjusted, as long as it is a rear wheel independent suspension, camber can be adjusted. The function of wheel camber is to improve the portability of steering control and the safety of wheel driving. Because there are assembly gaps between the kingpin and the bushing, and between the hub and the bearing, these gaps affect the normal operation of the wheel to varying degrees.

Adjustment method of camber angle of crv 202 1

Adjust the tightness of the hub bearing, replace the worn steering knuckle kingpin and its bushing, replace the steering knuckle with the wrong finger shaft angle, remove the front axle for deformation inspection and correction, and adjust the adjusting gasket between the upper arm shaft and the fixing frame. The camber angle of the wheel is used to make the wheel roll and slide close to the vertical road surface, so as to reduce the steering resistance and make the car turn easily.

Reduce the load of bearing and its lock nut, prolong the service life, improve safety, cooperate with toe-in and avoid tire wear. When there is an error deviation in the direction of the vehicle, the front wheel can return to the position in the middle-front direction by itself, and the rear wheel may eat the tire because of the inaccurate positioning of the rear wheel, that is, the installation position between the rear wheel and the rear axle is deviated.