How to add eight-character rings between space beans

Speaking of the eight-character hook system method, as we all know, some people ask the schematic diagram of the vertical drift system method, and some people want to ask the schematic diagram of the vertical drift system method. What's going on here? In fact, the schematic diagram of the binding method of vertical drift, let's take a look at the schematic diagram of the binding method of vertical drift, hoping to help everyone!

Eight-ring fishhook method

Step 1: Make preparations: prepare some necessary tools, such as fishing line, hook, seven-star drift, lead pendant, space beans, scissors, etc. The first device is a vertical float.

Step 2: Pass the fishing line through the steel wire hole under the float, and then pull the float to the line, usually six sections, and pull it to the line section by section according to the steps. Pay attention to put the coarse drift in the middle position.

Step 3: Install the space bean, fold the wire slightly for a short period, and also pass through the wire hole under the space bean, then pull the space bean onto the wire, cut off the thin wire with scissors, throw away the unnecessary part, and tie a knot in the front part to fix the space bean.

Step 4: Hook, that is, hang the hook on the fishing line.

Diagram of vertical drift binding method Step 5: Install lead pendant. The lead weight should not be too heavy, or the hook will sink as soon as it enters the water. So vertical floating is bound. The method of tying the eight-character ring to the main line.

The above is the binding diagram of vertical drift, which is the sharing of vertical drift binding diagram. I hope this will be helpful for everyone to read the fishhook binding method of the eight-character ring!