1.
Close the water valve under the sink.
2.
Unscrew the connection between the faucet and the hot and cold water pipes with pliers.
3.
Separate the vegetable basin from the sealant on the marble surface with props, and slowly open it along the edge with props.
4.
Take out the dishwashing basin and unscrew the old faucet.
5.
The new faucet was installed on the sink according to the instructions.
6.
Put the sink back on the marble surface, then tighten the hose and hot and cold water pipe joints under the sink, and then open the water valve to see if there is any water leakage. Water leakage needs interface treatment.
7.
Glue the seam between the sink and the marble surface with sealant.
8.
The selection of faucets and accessories should be considered from the following aspects:
1.
The first is the treatment and quality of the surface coating.
2.
The main body of the faucet should be cast from bronze or brass.
3.
The quality of the plug in the faucet directly determines the sealing and service life of the faucet.
4.
The handle of the faucet should have a larger range of motion.
5.
You should choose a faucet with large water output and fast water stop.