First of all, the disassembly method of aluminum gusset plate is described in detail:
When we redecorate or want to change a ceiling board, we will remove the aluminum gusset plate. If you want to dismantle it, you must know how to install it and how to install it.
Square aluminum gusset plate: If you want to disassemble it yourself, you can first buy a sucker, stick it on one corner of the square, and then pull one corner of the aluminum gusset plate hard. The other three corners can also be disassembled in the same way, which can effectively reduce the labor cost of disassembly.
Strip aluminum gusset plate: press one piece at a time when installing, and the last piece will probably have a small crack of 0.5- 1 cm. Wallpaper knife inserted along the gap, rowed back and forth a few times, found the position of the clip, and then gently pried down, first pried the middle, and pried the sides that were easy to deform.
This gusset is detached from the side strip. Usually the edges and tiles are fixed with glass glue, so it is necessary to cut the edges and tiles. First find the last gusset plate, then use a flat-head screwdriver or a thin long iron sheet to make several cuts along the glass glue, then insert it into the gap of the edge sealing, pry it gently with force, and then disassemble it from the edge in turn.
Second, the aluminum gusset ceiling disassembly matters needing attention:
1, the overall demolition is good:
When the original ceiling decoration is removed, it should be completely removed without retaining the original ceiling decoration structure. In particular, the suspenders, pendants and other structures that bear the weight of the original ceiling must be removed, mainly for future safety considerations, and it is also possible to install audio in the later stage.
2. Circuit safety:
Circuit safety is the key point of removing the ceiling. When removing the suspended ceiling, the power supply should be cut off first, and the original circuits and pipelines in the suspended ceiling should be removed as much as possible, because these circuits have no use value, and thorough removal is an ideal method.
3. Protect other equipment: When the ceiling is removed, it is easy to touch other equipment in the house. The safety of equipment and facilities in the original ceiling should be considered when dismantling. In the last century, many old houses had heating pipes on the ceilings, and some houses had air conditioning systems. At the same time, damage to ventilation pipes and flues must be avoided.
4. Pay attention to safety:
Workers engaged in ceiling demolition must wear safety helmets to avoid injuries caused by falling ceilings. At the same time, the light steel keel inside the gypsum board ceiling will be cut off when it is removed, so it is necessary to avoid hand injury and wear gloves for operation. At the same time, the dismantled ceiling must be stacked to avoid dumping and hurting people.
The above is the disassembly method of aluminum gusset plate. You got it? Because the use of aluminum gusset plate is more and more extensive and comprehensive in China, we must also understand the removal method of aluminum gusset plate. When we want to replace the aluminum gusset plate, we can remove the aluminum gusset plate conveniently and quickly. Aluminum gusset ceiling materials can quickly adapt to some humid environments, so many places are using aluminum gusset ceiling materials, so let's quickly understand what aluminum gusset materials are like.