The knitting method of the safety buckle pendant is as follows: firstly, the rope passes through the eyes of the safety buckle. Put down the two ropes above. Move a rope on the right to the left and press it on two ropes. Take off the left rope and put it on it. After passing through the rope from below, tighten it.
Half knot. The simplest thing is to wrap one end of the rope around, cross the rope and cross the circle. A splayed knot. Wrap one end of the rope around the city, then the end of the rope passes under the rope and comes around. Finally, the end of the rope passes through the circle and is tightened, and a knot is finished.
The car pendant knitting tutorial is as follows: first, tie a single knot. Weaving a Chinese knot into a single knot is just like tying an ordinary knot at ordinary times. Then, put it in the middle of the knot. Wrap two wires together and then pass through the knot. Then, continue knitting. Wrap line 2 around your finger and start pressing, picking, pressing and picking.
The latest knitting method of automobile pendants is as follows: Preparation materials: a lanyard, a jade rope, a pendant and a lighter.
Measure the required length of the thread or rope, cut it as needed, and tie both ends of the thread or rope to prevent the beads from slipping when knitting.
What if jadeite can't weave? How can an emerald bracelet not be woven?
Duplex, duplex is a practical knot, because its knot shape is small, and its biggest feature is that it is not easy to loosely connect, which means connection, combination and continuity. That is, it consists of two single knots, so it is named double knots.
Prepare four braided ropes and tie a knot about 5 cm from the rope end. Divide the longer end into four lines, with the first line pressing on the second line, the second line pressing on the third line, and the third line pressing on the fourth line, and finally put one through the first line.
When knitting a bracelet, you need to prepare a red rope and a lighter first. First, light the two ends of the rope with a lighter and pinch the first half to facilitate beading and hanging ornaments.
Prepare tools, first prepare a red rope and a lighter, use the lighter to light both ends of the rope, and pinch the first half of the rope to facilitate beading and hanging ornaments.
Weave a cross knot, cross it to make three rings, tighten the rings and rope ends, and hang jade gourd. Make three rings into a cross, and the middle ring presses the right ring. Turn the ring on the right over. Turn the two ropes below and press them on them. Wear the last ring in one direction.
How to weave a jade gourd bracelet
Jade gourd pendants can be directly strung with knots, which is simple and generous. At the same time, it can also be inlaid with K gold, diamonds and other materials, and then worn with a metal chain. This can not only show the unique charm of jade, but also have fashionable elements, killing two birds with one stone.
Jade gourd pendants can be worn around the neck, wrist and feet. Jade gourd is a jade headdress, so the jade gourd pendant can be worn around the neck. The jade gourd pendant worn around the neck also gives people an elegant and generous feeling.
Theoretically, the maximum thickness of jadeite gourd is half the diameter of the ball. In fact, the thickness of jadeite carvings is generally in a specific range (about 5~8mm), so the thickness of jadeite gourd is relatively fixed, and it is not forced to be proportional to the golden section of 0.6 18.
For a small jade pendant with good color, the third brother suggested that you had better make a K-gold clasp, which is more beautiful to wear with a K-gold necklace. If it is large and has some thickness, don't choose K gold chain. Not only does it not match, but the pendant is too heavy, and the chain puts some pressure on the neck.
There is no problem with one corner of jade gourd, and it can still be worn. Jade is a product of nature, and it is normal to have defects. Jade gourd's moral: jade gourd is round and full, with a small belly, which means auspicious and complete, and widely accepts financial resources. The homonym of gourd and "Fulu" also means that Fulu are both perfect.
Weaving process of automobile pendant
The knitting method of the safety buckle pendant is as follows: firstly, the rope passes through the eyes of the safety buckle. Put down the two ropes above. Move a rope on the right to the left and press it on two ropes. Take off the left rope and put it on it. After passing through the rope from below, tighten it.
Half knot. The simplest thing is to wrap one end of the rope around, cross the rope and cross the circle. A splayed knot. Wrap one end of the rope around the city, then the end of the rope passes under the rope and comes around. Finally, the end of the rope passes through the circle and is tightened, and a knot is finished.
The latest knitting method of automobile pendants is as follows: Preparation materials: a lanyard, a jade rope, a pendant and a lighter.
The car pendant knitting tutorial is as follows: first, tie a single knot. Weaving a Chinese knot into a single knot is just like tying an ordinary knot at ordinary times. Then, put it in the middle of the knot. Wrap two wires together and then pass through the knot. Then, continue knitting. Wrap line 2 around your finger and start pressing, picking, pressing and picking.
Measure the required length of the thread or rope, cut it as needed, and tie both ends of the thread or rope to prevent the beads from slipping when knitting.
A complete collection of hand-woven methods for jade pendants
First, put on the rope and smooth it with a torch, so that it passes through the hole of the jade jewelry. Leave a suitable binding length according to personal preference. Open the end of the rope, and then tie a knot around the rope left in the last step with two ropes.
Prepare 1 jade safety buckle and 1 pendant rope. Pass the pendant rope through the small hole in the middle of the safety buckle. Pass the other end of the rope through this ring. After passing through, tighten the upper ring and turn it around. Thread the other end of the rope through the new loop.
The most commonly used knot of jade pendant: snake knot is generally used to wear beads and small jade. Shaped like a snake bone, the knot is slightly elastic and can swing left and right. Commonly used in necklaces and bracelets.
Jade gourd bracelet can be woven with cross knots, flat knots and diamond knots. The cross knot is played by arranging three rings in a cross shape, and winding the rings and rope ends tightly to hang jade gourd. The flat knot hung on jade gourd's car is mainly used to complete the bottom of beads made of jade string, which is movable and convenient to wear.
The first step is to cut a rope with a cutter and punch it, about 25 cm, depending on the size of the hanging hole. Burn one end of the jade rope and rub it with your fingers. Be careful not to burn your hands. The jade rope passes through the hole in the jade, keeping it as long as the front rope and the back rope.
Yuzhu knot can be woven with ropes such as flat knot, winding and bird's head knot to look good. First, we should prepare about six ropes of the same length and size. Usually, it takes two ropes to weave a jade rope. Flat knot is to cut the rope into a suitable size, align the two ends, and tie the knot at the hole of the jade pendant to fix it.