Precautions for fishing
1, the main line is slightly hooked to the pole, and it must be locked with space beans to prevent disconnection.
2. When moving the float, be sure to pull the pole back to prevent the pole from being slightly bent and broken.
3. When moving space beans, be sure to soak the main line first to prevent friction, fever, fuzzing and injury, and easy disconnection.
4. For the same hook, before pulling, soak the pulled thread to prevent the thread from generating heat and fuzz.
5. When hooking, be sure to rotate the auxiliary line to the inside of the hook handle, so as not to wear the auxiliary line, but also to pull the bait smoothly and fully.
6. When pulling the rod, you must use force, and it is best to rotate it, so that the rod is evenly stressed, and it is not easy to break the rod or enter the water.
7. Before closing the pole, be sure to clean it with a towel to prevent the pole from corrosion and prolong its service life.
8. The spacing beans on the lead holder must be 1 ~ 2mm, so that the lead holder can rotate freely and the sub-wires can be prevented from winding.
9. When tying the string, there should be no knot between the hook and the eight-character ring, which is easy to break.
10. When the float is inserted into the float seat, it should be inserted when the float seat is flattened, so that there is no air in it and a vacuum is formed, and the float is not easy to fall off.
1 1. When the hook is hanging at the bottom, put down the pole and wait for a while. Many times, the hook can fall off by itself.