How to build a pig shed?

If you want to build a pigsty, you should pay attention to site selection, structural planning, septic tank construction, water and food separation and so on. The terrain should be high and leeward flat with a width of 8- 12m and a width of about 4-6m. East-west direction, leaving room to build septic tanks, and the water plants in the tanks should be built separately.

How to build a pig shed

1, terrain

The most important thing is to find a suitable place before we start building pigsty. Because the greenhouse is not as stable as a cement brick wall, it should be built in a sheltered or leeward place as far as possible to avoid collapse due to strong wind. The terrain should be built in a higher place without slope to prevent environmental pollution.

2. Structure

Greenhouse is generally rectangular, 8- 12 meters long and 4-6 meters wide. It is best to face east and west, so that there can be sufficient lighting. The best direction of the greenhouse is the north-south direction, and the shutter doors that can be pulled left and right can be built to control the ventilation, so that the greenhouse has sufficient ventilation environment.

3. Septic tank

The construction of septic tank is an indispensable part of greenhouse construction. In order to prevent environmental pollution when raising pigs, it is necessary to use cement as the ground and build a special septic tank. Each pigsty is separated by iron railings, and then a special cesspool is built together with the cesspool to prevent pollution.

4. Water and food

When planning the indoor structure, it should be noted that the sink and the trough should be placed separately. Generally, the tank is 2m long and weighs 10cm, with an interval of about 30cm. It is most suitable to build them on both sides of the pigsty, one side is the sink and the other side is the trough, to avoid the pollution of feed to the sink.