Installation method of movable partition plate
Tracking system:
1. Before the partition is installed, check the track, and the track components are assembled in sequence on the floor.
2. Mark the track line and place the bracket in a specific position.
3. Install the rail bracket to the ceiling.
4. Check whether the movable partition wall is firmly fixed on the track. When the rails and brackets must be stored loosely in the storage area, so that the bracket plates can be moved to other places.
5. Finally, before adjusting the facilities of the main track, measure the proper position of the storage track. This is very important for the placement of intersections.
Installation of track facilities:
1. When the partition is hung on the track, the escape track can be removed without rebuilding the crane.
2. For the escape exit track, it must be a special bracket track connection.
3.？ When installing the track, the construction should be carried out according to the accurate data adjusted during the measurement.
Track adjustment:
1. Please remember that all the rails above the brackets are loose enough. Ensure the track pause time.
2. Tighten all track connections and adjust the horizontal height of the track correctly. The track installation direction must also be horizontal and straight.
3. When installing track facilities, sound insulation and mineral wool are necessary plates for installation.
4. Are there "L" and "T"? The "ten" port is used to connect the steering, and there are left and right points. Generally, it is not recommended to use the word "ten" to refute. L and t are trimmed to corresponding sizes, and their positions are indicated by numerical marks.
Feasible wallboard:
1. Open the escape route;
2. According to the tracking system, remember to fix it on the track in the correct order.
3. Before closing the movable partition, adjust the height of the carrier and check the right angle of the track so that the track partition can run well.
4. Check the verticality of all partitions. If they are not damaged, they can enter the edge of the aluminum frame of the rubber seal vertically without bending (if the connection is inappropriate, otherwise).
5. If the track direction is horizontal, but the partition is suspended and inclined, the height of the vehicle must be adjusted.
6 clockwise = partition rising, left turn = partition sinking;
7. Remember that height is good. Tighten the socket for inserting the carrier, adjust the partition and open it when the track is full, and adjust the width of the door shape.
After reading the installation method of the movable partition above, although it is not simple, Bian Xiao believes that you will be irresistible if you are smart. If we hold our own party or banquet, we can install our own movable partition with a few good friends, and the effect will be very good. In addition, the movable partition also has the function of efficient fire prevention, which can be used to resist the spread of fire in an emergency. There are many kinds of movable partitions on the market now, and all kinds of movable partitions are dazzling. Be sure to shop around before buying.
Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~