What is a disinfection shoe cabinet?
Disinfection shoe cabinet is a high-tech, healthy and intelligent shoe cabinet product evolved from traditional wooden shoe cabinet. Disinfection shoe cabinet not only has more fashionable appearance and changed materials, but also has intelligent functions such as disinfection, which can kill all kinds of bacteria in shoes and has good deodorization effect.
Principle of disinfection shoe cabinet
The stainless steel heating plate generates a certain temperature to heat the sole, so that the temperature of the sole rises and the sweat in the shoe slowly evaporates. An ozone generator, a low-temperature electric heating element and a microcomputer control system are also installed in the disinfection shoe cabinet. Through computer control, ozone with appropriate concentration is generated in the shoe cabinet, and shoes are deodorized, sterilized and mildewed by using the chemical characteristics of ozone. At the same time, the electric heating element is controlled to work intermittently to keep the proper warm temperature in the shoe cabinet.
Dry your shoes slowly. Electronic disinfection shoe cabinet function
1, deodorizing
Ozone (O3) is an allotrope of oxygen, which can destroy the cell wall of decomposing bacteria, quickly spread into cells, oxidize glucose oxidase necessary for oxidizing glucose in decomposing bacteria, or directly interact with bacteria and viruses to destroy cells, ribonucleic acid (RNA),
The decomposition of macromolecules such as deoxyribonucleic acid (DNA), RNA, protein, lipids and polysaccharides destroys the metabolism and reproduction of bacteria. 2. Shoes and shoes
Built-in intelligent shoe shine function.
3. Dry ...
The shoe cabinet is equipped with intelligent PTC heating air circulation system for condensation and dehumidification, or other heating plates are used. Can intelligently dry shoes and remove mildew spots.
4. Safety
Automatic operation, power failure when the door is opened, automatic detection of (O3) concentration in the machine to prevent (O3) leakage.
5, energy saving
Intelligent control switch button, energy saving and environmental protection.
6. Fashion
Fine workmanship, beautiful and generous.
How to maintain the electronic disinfection shoe cabinet
1. Use a clean soft cloth and always wipe the dust and stains on the surface of the shoe cabinet. Never use ordinary water, wet cloth or hard cloth to wipe the surface, mirror and glass. Avoid contact with acid, alkali and grease, and wipe the board with high-purity industrial alcohol when possible.
2. Hard objects such as hammers are not allowed to strike the board surface of shoe cabinets, nor are they allowed to cut the board surface with a knife. If the veneer is found to have local cracks, it should be repaired in time, otherwise the cracks will widen or even bend over time, resulting in complete damage.
3. Clean the mirror or glass surface of the shoe cabinet with a special cleaner.
4. Maintain the shoe cabinet regularly, generally once every quarter. Wipe the dust on the furniture surface with a soft cloth, and then wipe the furniture surface evenly with wax light. Light wax can protect furniture paint film from moisture, scratches and burns. For stains that remain for a long time or are difficult to remove, cotton cloth can be dipped in a small amount of gasoline or alcohol to remove them, and then a proper amount of wax polish can be applied to the cotton cloth, and then the wax can be wiped evenly in blocks with dry cloth without leaving wax marks, so that the damaged part of the paint layer can be treated; The part burned by cigarettes,
If it is limited to the surface paint layer, you can soak it in water and gently grind off the stains with fine sandpaper, then wax it; If there are scratches on the surface but the depth of wood is not enough, wax polish can be used for local direct polishing, and deeper scratches should be polished with sandpaper; If the damage is as deep as wood, it should be polished and repainted to make the furniture surface bright, durable and moisture-proof. Metal handles of furniture hardware fittings can also be painted and polished with wax to make them rotate flexibly, rust-proof and oxygen-proof. 5. The daily maintenance of metal parts and acrylic surfaces should keep the surfaces clean and dry to avoid being hit and scratched by hard objects, which is the best way to prolong their life.
6. Don't disassemble electrical parts at will, but put them in a stable place.
The above is the related content of electronic disinfection shoe cabinet. I hope this article can help you, and please continue to pay attention to us.