Step 1: Wrap two wires around each other 10-20 times.
Step 2, wrap the thread end of a thread back to the center of the winding section and insert a winding point.
In the third step, the end of another thread is wound back here and inserted into the same winding intersection, but in the opposite direction.
Step 4, after the above steps are completed, pull the two wires tightly at both ends.
Step 5, tighten the knot as shown in the figure.
Step six, cut off the extra ends of the two lines, and it is finished.
This method is more suitable for the link between lines with little difference in line diameter or lines with smaller line diameter, and it is suitable for Tamsui Luya fishing to use PE as the main line for your reference.