B2 What is the eight-character formula for reversing into the warehouse?

The starting position is very important, and the low-speed starting is more reliable; Choose a good reference to turn and correct it in time. Start slowly and turn quickly, and call back at the right time; Don't worry on the way back, remember to control the speed.

Don't turn too much, the rear direction is very important; Once again, it is slightly modified, taking into account the rear of both sides; Pay attention to the same when leaving the library, and adjust the parking position; Look at the main pole to find the right time, grasp the direction late and early; Keep turning around the main pole, and the front wheel of the car is straight down.

Parking in reverse is a compulsory item for getting a small car driver's license after 20 13. Examine the driver's ability to control the car on the field. Parking in reverse is an assessment point of driving test. That is, during the moving process, the vehicle is controlled to be correctly poured into the garage from both sides. There is a time limit for reversing into the warehouse during the exam.

There are three most common ways to reverse the car. The first type is "non-"dumping, which is common in various hypermarkets. The second type is the "one-shaped" reversing storage on the roadside, which is often called side parking. The third is the less common diagonal flip warehousing. 70% of the accompanying students think it is difficult to pull over.

Control the driving speed. Idle in 1 gear or reverse gear. No matter what speed you start driving. Observe carefully when controlling the turning timing, grasp the turning points and turn in time. When controlling the driving route, the driving route of the car mainly depends on the speed of turning the steering wheel and the driving speed. When reversing, look at the sideline and correct the direction in time to keep the car upright when it is in storage.