Main line: cut the fishing line according to the length of the pole, then string a small piece, two space beans, a floating seat, three space beans, a lead seat and a space bean in turn, and finally tie a figure-eight ring at the end of the line.
Fold a section of double-stranded wire about 15cm at the other end, and tie knots at both ends, leaving a distance of about 7-8cm between the two knots. When hanging the rod, use two fingers to pass through the double-stranded wire between the two knots, and then wrap it around from the outside, so that the double-stranded wire becomes a hook, which can be used after a little buckle with the fishing rod and behind the dead knot on the nylon rope. After use, you can untie the buckle by pulling the knot on it. ?
Secondary line: Tie two hooks and tie a knot near the middle. The requirement is that the fishing line length at both ends of the knot is 1- 1.5cm ... When using, you can wear the dead button by crossing the main line. It is not recommended for novices to tie the thread themselves. It's best to ask the boss to use it in the fishing gear shop and do it yourself after getting familiar with it.
The size of the wheel seat is determined by its inner diameter. For example, if the inner diameter of the wheel seat is 20.0MM, then the model of the wheel seat is 20#, and commonly used ones are 16#, 20#, 22#, 26# and 30#. Plate wheel seats are generally divided into 6# and 7#.
Extended data:
Judgment method for purchasing main fishing line:
1. When buying a fishing line, you should not only look at the brand and label, but also personally check the diameter and strength of the fishing line. There is no special detection tool for anglers in the market, and only an outside micrometer and a spring scale can be used for detection.
2. When detecting the fishing line, first check the flatness, resilience and softness of the line by hand.
Observe whether the transparency of the line is consistent in a bright place, and then measure the diameter and tension of the line. If the line diameter and tension are not much different from the specified values in this label, the line diameter does not exceed positive 10%, and the tension does not exceed negative 10%, then this line is still acceptable (there is no fishing line thinner than the label and larger than the standard tension in the market).
When buying fishing line, you'd better actually test its tension.
The method is to put sand in a cloth bag, tie the line and hang it. The weight of sand when the thread is broken is the actual tension of the thread, which is compared with the calibrated standard to judge whether it is qualified or not. In addition, knead the thread into a ball and squeeze it with both hands. After loosening, see if it can automatically recover instantly and quickly without wrinkles, indicating that the line is elastic.
At the same time, we should also observe whether there is any hard injury or looseness. If it is a colored thread, twist it by hand to see if it fades. After inspection, don't buy it as long as there are signs of defective products.
Baidu encyclopedia-fishing rod
Baidu encyclopedia-fishing line