You can take a needle with a large pinhole, thread the wool through the pinhole, then through a braid on the rib, through an adjacent braid, and then through two adjacent braids on the sweater to complete a stitch. Then continue to sew others according to this rule until they are all sewn, tie a knot on the inside of the sweater, cut short the wool and finish the sweater sewing. Sweater hemming is difficult to operate. If you are not very skilled, you can ask a professional tailor to wrap the edge.
Methods/steps
1. Explain that I didn't bring my needle today. I made a simple needle with a paper clip and put it on, as shown below.
2. Thread the needle thread into the two coils on the left needle, and then pull the thread out, as shown in the figure below.
3. Thread the needle into 1 needle and take it out with a belt, as shown in the figure below.
4. Then slide the 1 needle down from the left needle and tighten the thread, as shown in the figure below.
5. The needle enters 1 and the second needle is left, and then comes out from 1 needle, so it slides down, as shown below.
abstract
1. Thread the needle and thread into the two coils of the left needle, and then pull out the thread.
2. Thread the needle into 1 needle and take it out.
3. Slide the 1 needle off the left needle and tighten the thread.
4. The needle passes through the 1 needle and the second needle of the left needle, and then passes through the 1 needle, slides down, and repeats to finish the sewing of the sweater cuff.
end
Matters needing attention
Tip: You can also lock the edges with the same color line.