Method steps:
1. Sun all kinds of waste boards. Then, according to the size of the drawings designed by ourselves, these abandoned boards are sawed into raw materials for wooden stools.
2. Put the sawed boards together to see if they are the right size.
3, the size is ok, just start assembly and so on. Apply glue to the side of the wooden chain, and then tie the two boards together with clips and webbing until the glue dries. A total of six boards with the same shape were made in pairs.
4. Scrape off the excess dry glue with a knife, and then smooth it with sandpaper.
5. To be the main body of the storage stool, it is necessary to use the pasted combination board. At the location of the link, drill the hole by hand and hammer the spike into the two plates.
6. When installing the cover of the stool, paint primer and varnish on the inside and outside of the stool with a brush, and then set aside to dry.
7. Finally, install the stool cover on the side of the stool with loose leaves to form an openable cover. It's done.