What are the height and width specifications of outdoor steps?
1, Code for Design of Indoor Stair Slabs. The specifications of stair boards include the specifications of pedals and risers, which are generally required to adapt to the size of people's soles. Generally speaking, pedals with wider pedals and lower risers are more comfortable. The pedal width of indoor stairs should not be less than 24 cm, and generally 28 cm is appropriate. The riser height should not be higher than 20 cm, and it is generally more comfortable at 18 cm. Moreover, the width of each pedal should be the same as the height of the vertical plate, otherwise people will easily fall down.
2, indoor stair step size design specification. The step size is the width of the stairs. The step size of indoor stairs is generally 90 cm, which saves space and makes people walk comfortably. Although the stair design code is often mentioned, there is no definite index, which is formulated by large stair enterprises and stair industry. Therefore, the so-called stair design code has no specific industry hard standard.
How to tile stairs and steps?
1, in the correct order.
First of all, it should be noted that the normal stair step pasting sequence is from top to bottom, which is convenient for construction (ignoring the wooden floor construction method, only taking ceramic floor or stone step as an example). When the stairs used should be pasted with tiles or stone steps, they need to be divided into two parts to ensure normal traffic! The basic steps are as follows (taking concrete stair foundation as an example): clean up and remove obstacles? Pay-off positioning? Water sweep (plain cement mortar)? Mortar paste vertical plate (side plate)? Semi-dry mortar leveling? Ordinary cement mortar stuck to the bed board? Edge mortar compaction? Remove excess mortar for the next countertop? Clean and wipe the surface? Repeat the above steps and paste down continuously? Saving water again? Joint and clean with caulking agent.
2, stair step tile shop is stuck matters needing attention
First, pay attention to the safety of home improvement stairs, and second, pay attention to economy. The economy there, including the economy, the economy of the stair tread height and the capital of space design are generally between 180mm-200mm. Only in public places will the stair tread height be designed between 130mm- 160mm. The second is to strengthen the distance from the center. The general design is the depth between 230 mm and 250 mm, which should not be less than 220 mm. The design of strengthening the depth is less than 300mm step by step, and two steps are not enough.
What are the height and width specifications of outdoor steps? There are obvious differences in the height and width of the stairs, so we should have a better understanding of some data. Only by fully understanding the knowledge can we further promote the distance between everyone and villa buildings. If we want to repair the tiles on the steps in the future, the steps must be correct. If the steps are not clear, the tiles can't be repaired.