1, lead leather seats and lead leather should be suitable.
The length of lead base we use must be appropriate, it should be basically the same as the length of lead, and the thickness of lead should also be appropriate. Use thinner lead when fishing for crucian carp, and use thicker lead when fishing for carp. If the wire is too short and too thick, it is easy to make the wire rotate back and forth when throwing and lifting the rod, thus winding the sub-wire.
2. The spatial bean model should be suitable.
First of all, the size and model of the space bean should be appropriate, and its inner diameter should match the diameter of the fishing line. It shouldn't be too big or too small. If it is too large, the locking effect of space beans will be weakened; if it is too small, the friction of space beans will damage the strength of fishing line.
The second is the number of space beans. Lock two space beans above the lead base, not one! This can lock the lead holder and prevent it from moving back and forth, which will reduce the possibility of rotation and further reduce or eliminate the winding of the sub-wires.
3. Use anti-wrapped beans
At present, many space beans will have an anti-winding bean on them, which must be used when fishing. It is located between the lead holder and the splay ring, which can prevent the lead holder and the lead holder from rotating to some extent, resulting in the winding of sub-wires.
4. Tips for peeling lead skin
When trimming the lead, cut the lead towards the lead base as far as possible, instead of cutting both ends of the outermost layer of the lead. This can make the lead skin and lead skin seat combine as evenly as possible. After cutting, scrape the edge of lead skin tightly with nails, so that the center of gravity of the whole lead skin is vertical to the lead skin seat, and the winding of sub-wires is eliminated.