How to fasten the belt of bathrobe?

How to fasten the belt of bathrobe?

How to fasten the bathrobe? Bathrobe and bathrobe have similar functions. In fact, in our daily life, bathrobes are rarely used by everyone. Accommodation places such as general hotels are more common. Let's take a look at how the bathrobe is fastened.

How to tie the belt of bathrobe 1 1, bow tie method, first grasp the central part of the belt with your right hand to align it with the center line of bathrobe, and then wrap the belt with your right hand around your waist to make the belt look long on the left and short on the right at this moment. Next, fold the left belt into a triangle, and then cross the two belts, paying attention to the upper length and the lower length. Tie a knot at the upper edge of the belt to improve the binding force. Fold the long ribbon and tie a bow. Then tie the short belt and the long belt into a bow. Adjust the shape and position of the bow and pull the whole bow to the back.

2, rose method, the short end of the belt is folded in half, with the short folded part as the center point, and the long end is wrapped around the short end to make petals. After winding it several times, the embryonic form of a rose will appear. Finally, remember to tighten it to fix the rose.

3, casual method, if you don't think the bathrobe needs too many gorgeous decorations, then it is no problem to simply tie it casually, as long as it is steady. The general method of tying is that the belt passes through the buttons on both sides, and then it can be tied around the waist.

Bathrobe rope has the following styles:

1. Half knot: 1, trying to pass the rope through the rope end;

2. Pass through the rope loop;

3, use: to prevent slipping, or when the end of the rope is open, it can be used as a temporary to prevent further off-line.

Second, the splayed knot: 1, first cross the rope end;

2. The rope head bypasses the main rope;

3. Complete tensioning after passing through the rope loop;

4. Use: it can be used as a temporary or simple stop and braking point on the rope; Features: even if the two ends are pulled tightly, they can still be easily untied.

Third, flat knot: 1, cross;

2. Wrap the two ends of the rope and pull it;

3. cross;

4. Wrap it at the top of the cross again. At this time, if the winding direction is wrong, the result will become a layman's tie, which requires special care;

5. Grab the rope ends at both ends and tighten them hard;

6. Suitable for connecting ropes with the same thickness and material; But it is not suitable for ropes with rough and smooth surfaces.

How to fasten the belt of bathrobe? How to fasten the belt of bathrobe?

The method of tying the bathrobe, the bathrobe can be tied by the library. First, leave one side of the belt about 40 cm long and fold it in half on your shoulders. This part is called the hand first, then the belt at the other end is wrapped around the waist twice, and the rest is called the vertical edge. Hold your hands with vertical edges, tighten them forward, and then tie them in knots.

After dealing with vertical edges, there are still many vertical edges. Fold it into a long strip, which is about the width of the shoulder. Fold it from the middle of the strip and it becomes a bow. Then, wrap the bow by hand from above. When winding, wind the first knot together, tighten it and wind it several times. Finally, the rest of the hand is put into the belt, the butterfly suit is transferred to the back, and the knot is completed.

Kujie is more suitable for women, in addition, bathrobes can also be tied with shell knots, which is more suitable for men.

The shell knot is simple and can be regarded as two regular knots. First, leave the hand with a vertical edge, then extend the hand obliquely downward and wrap the hand with a vertical edge to form a knot, thus completing the first knot. The second knot is to bend the vertical edge downward and inward into a gap, fold your hand upward in the opposite direction, pass through this gap and tighten it, so that the shell knot is completed and the shell is back forward.

How to fasten the belt of bathrobe 3. How to fasten the belt of bathrobe coat?

1 A little on the front of the clothes is a cross-shaped belt that naturally hangs down. This is also the simplest method.

1 method is very easy to loosen. Suitable for samples or models to wear for a short time. We need to use the second method for the working people. Type two ten bytes on your front. This kind of thin money is tight and not easy to loosen, so it is suitable for commuting to work.

The third method is to open a button hole at one end of the belt, then buckle it with one end and let the other end hang down naturally. This method is more casual. Casual style.

The fourth method is to tie a single-button bow of 1 in front of it, and make a circle on it, with two straps hanging down one long and one short.

The fifth is to tie a bow in front of you. This kind of knot is also stronger.

The sixth is to install two metal buckles at one end of the belt, fasten the belt with the metal buckles, and tie the excess part in the belt. This method is more handsome.

The seventh method is to fasten the belt first, and then nail the belt head on the inside of the belt, which seems random.