Self-priming modified grinding head air intake?
Whether it is suitable for refitting mushroom head is not necessarily related to self-priming engine or turbocharged automobile engine, and the actual effect of refitting also depends on the car. If your engine is a small displacement self-priming engine, it will greatly improve the power compared with modifying the ECU program flow of mushroom head brush. If you are a high-power self-priming engine, it may be useful to modify the mushroom head, but the expansion tank and intake pipe need to be improved at the same time, otherwise the intake efficiency will be jeopardized.
What is the use of self-priming modified mushroom head?
It has a certain practical effect, but it is not very effective. Because it is one thing to improve vehicle power and air intake, it is also very important for ECU to control ignition advance angle. If the oil system provided after increasing the air intake does not bring extra gasoline and diesel, it will not be very helpful to improve the vehicle power. Secondly, large-flow intake will continuously reduce the intake pressure, which will damage the main performance of low torque of the automobile to some extent.
What must be paid attention to when refitting the air inlet?
Let's go back to the problem of mushroom head. Now many mushroom heads are equipped with a set of tubes. Be sure to check whether there is room in the engine compartment before installation and use, otherwise it will be very uncomfortable if you buy it and find it can't be installed. The heat insulation of the gas pipeline in the hometown of crane is also particularly important. If the inlet temperature is too high, the oxygen content in the air will decrease, which will also endanger the power output.