Fishing line docking method

The fishing line docking method is as follows:

First, the valve core connection method

Connecting with the valve core is simple and practical, and the specific steps are as follows:

1, tie a knot on the soft belt slightly above the fishing rod and fold it into a semicircle;

2. Sleeve the manufactured valve core on the Microsoft belt of the pole;

3. Thread the fishing line through the soft belt loop, and then tie a knot.

4. After fishing, it is convenient, simple and practical to take back the fishing line directly from the soft belt of the valve core.

Second, the looper connection method

It is relatively simple to connect the fishing rod and fishing line with a looper, and the specific steps are as follows:

1, or tie a knot on the soft belt slightly above the fishing rod for later use;

2. Make a circle at the top of the fishing line to be used;

3. Fold the perforated ring into two rings;

4. Overlap the rings together, then pass the soft belt through them, and finally, tighten the fishing line.

Third, the rubber band connection method

The specific steps are as follows:

1, put the rubber band on the fishing rod. If the fisherman wants to put the line longer, put the rubber band on the first few sections of the fishing rod; If you want the line to be shorter, put it at the back of the fishing rod and circle it several times to play a fixed role.

2. Wear rubber caps on fishing lines;

3. Tie the connecting ring to the end of the fishing line, and finally connect it with a rubber band with the connecting ring.

Four, eight ring connection method

This method is also relatively simple, and the specific steps are as follows:

1. Make the soft belt above the fishing rod slightly into a circle and fasten it with a line;

2. Connect the connecting ring with the pole flexible belt;

3. Take it down and store it directly after use;

Five, the connection method of spatial bean

1. Fold the section of fishing line to be knotted into a semicircle;

2. Pass space beans of appropriate size through the semicircle;

3. Tie the soft belt slightly above the fishing rod with a knot, and cover the soft belt with a semicircular fishing line;

4. Tightening the fishing line and shrinking the coil can play a role of imprisonment.

The above are five connection methods of fishing rod and fishing line, which seem simple but practical. Fishing friends who catch dozens of pounds of big fish will not pull the joint apart, and they can easily drag the big fish ashore.