Use of rotary fishing reel: the winding mode is 1. Check the winding amount of the reel (generally marked on the reel or packing box) and choose the appropriate fishing line model. 2. Install the fishing reel on the fishing rod and turn off the fishing reel inspection switch. 3. Knot one end of the line, pass through a guide ring of the fishing rod, open the outlet ring of the fishing wheel, tie the line on the reel, close the outlet ring, pull the fishing line, and check to make sure it is firmly fastened. 4. Keep the fishing line straight and tight, and start to rotate the rocker of the fishing boat at a constant speed to take up the line. 5. When the winding height is about 1.5-2 mm lower than the spool edge, don't wind more or less, otherwise it will hinder you from throwing the wire correctly. Keep the fishing line straight and tight, stop winding and cut the fishing line. 6. Then fix the fishing boat on the fishing boat seat on the fishing rod and you can get ready to fish. Although the drum fishing reel is not big, its linear capacity is equivalent to that of the rotary fishing reel. Wheel loading method 1. Install the fishing reel on the fishing rod (closed state). 2. Turn on the fishing wheel inspection switch, open the fishing wheel outlet ring, pull out the outlet ring, close the outlet ring, and thread the line through the fishing rod guide ring in turn. 3. Tie down the rope, tighten all sections of the fishing rod, and close the fishing boat. Throwing method 1. Turn on the fishing boat inspection switch, turn the rocker, adjust the line to a suitable position, and turn off the inspection switch. 2. Hook the fishing line with your forefinger, tilt your head and send the rod back. If the line falls to the ground, the distance between the rod and the ground is better. 3. Push the fishing rod forward sideways. When the pole is in front of the side and forms a 45-degree angle with the ground, the conductor will be loosened and ejected due to the shaking force. 4. When the line falls into the water, shake the lever, close the water outlet ring, tighten the fishing line, and put the fishing rod on the fishing rod rack after paying out. Take-up method 1, lift the pole and shake it. Keep the fishing line tight and straight, and the pole is at a 45-degree angle with the ground. 2. Shake the fishing wheel at a uniform speed, keep the fishing line tight and straight, and adjust the elastic knob of the fishing wheel according to the fishing force. 3. After the fish is collected, put the fishing rod on the shelf, and the fishing boat should not touch the ground to get dirty and scratched. Unloading method 1. Turn off the inspection switch and remove the wire suspension console. 2. Tighten the wire with your fingers and shake the rocker. 3. Pin the thread on the threading wheel. 4. Remove the wheel, wipe it and install it. Drum fishing reel: the winding method must first pass the fishing line through the conductive ring and then tie it to the fishing reel. The winding height should be low, and the edge height of the drum is about 1.5-2mm. Don't wind more or less, or it will prevent you from throwing the line correctly. Although the drum fishing reel is not big, its linear capacity is equivalent to that of the rotary fishing reel. Adjusting the braking mode The star braking performance of the drum fishing reel is the same as that of the spinning type, and the fishing force of the drum fishing reel is adjusted by rotating clockwise or counterclockwise. In the rope throwing method, some preparatory work should be done first, that is, first adjust the adjusting button to adjust the speed of the reel to prevent the line from recoil because the output linear speed of the wheel exceeds the linear speed of the rope throwing too much (because the rope throwing speed is related to the weight of the bait and the arm strength of the fisherman, after adjusting the adjusting button, push the clutch button with the thumb, which must be adjusted to suit the individual). After adjusting the adjustment button, the next step is to push the clutch button with your thumb, so that the reel and the reel are in a separated state. Correct the throwing posture and throw it at your own goal. Note: 1. Before throwing the line, once the clutch button is engaged, gently press the fishing reel with the thumb of the hand holding the fishing reel to prevent the line from slipping; 2. At the moment when the bait enters the water, the thumb should also hold down the reel in time to slow down or even stop the line, so as to avoid the phenomenon that the fishing line is entangled or blown off due to the great speed difference at the moment when the bait enters the water. Then swing the rocker arm forward to make the clutch structure in meshing state. Please don't be impatient and nervous when the wire explodes. You can unscrew and remove the right cover, take the off-line blasting wheel, straighten it and reinstall it. (When the clutch button is pressed, it is to ensure that the winding wheel and the spool in the clutch structure are in a disengaged state, and in this state, the winding wheel has the outlet function; Release your fingers again and shake the rocker arm forward. When a slight click is heard, the clutch structures are in a state of mutual engagement. In addition, the rocker arm should not be shaken when pressing the clutch structure, because it is easy to damage the cable arrangement system. ) When you have mastered the performance, structure and characteristics of drum fishing reel and are good at throwing lines, you can relax the adjusting knob appropriately to reduce the resistance, which will increase your throwing distance.
How to solve the deviation of load line of raft fishing boat
Hello, if there is a problem with the car, ask the car master. 4S shop professional technician, 10 minutes to solve.
How to arrange wooden fishing boats? The newly bought wooden raft fishing boat doesn't know how to arrange horses correctly! Solve, thank you!
Hold the lever normally, and the thread is under the wheel.
How to use a raft fishing wheel
Raft fishing usually uses smaller side wheels; The choice is small because the water depth of the raft fishing ground is between 10 and 30 meters (the design of the raft is estimated to be convenient for fixation), and it is not necessary to use too long lines. Small size, light weight, easy to operate with one hand. As for the shortcomings of the cross wheel, it is well known that it is not conducive to long-distance shooting. But this shortcoming is not obvious in raft fishing, because the punctuation of raft fishing is usually in the feet. The advantages of the cross wheel are very important in the process of raft fishing: because the guide ring at the end of the raft fishing rod is small, the water outlet direction of the cross wheel can just follow the direction of the guide ring; This is especially obvious when using the light fishing group. Of course, small spinning wheels are more convenient to buy and widely used in raft fishing. Before fishing, as long as the ring of the fishing line memory is straightened, the line can be put out smoothly.
Beginners choose a raft fishing wheel for help.
Wang Xiaofeng Ant has an instant pay-off function more than Xunlei Ant King, which is practical, with a speed ratio of 3.6: 1 and fast take-up. Line 3 can be wound around 100 meters, and the cup bearing smoothness is acceptable. The disadvantage is that the gap is a bit big, and the training is enough. After sale, it is guaranteed by the ant king, which is worth having.
Excuse me, master of raft fishing: which is better, the micro-lead wheel with cable arrangement function or the micro-lead wheel without cable arrangement function?
Of course there is! But many high-end goods don't. Originally, all the boats that didn't have the line arrangement function were used for large-scale fishing, because the fish were too big and the line was too thick, which might damage the guide ring of the line arrangement ... But the raft fishing didn't have such a big fish and thick line ... In addition, without the line arrangement, the line cup would be ugly ... Finally, both the front fishing tackle and the raft fishing wheel didn't arrange the line (Sparus macrocephalus didn't arrange the line) ... The disadvantage was that.
How to surf the Internet on wooden rafts?
Baidu search
Dry fishing in the sea
Video tutorial on using raft fishing wheel
You can buy a wooden raft fishing wheel with instructions, and the owner will tell you how to use it.
How to configure the line group when a novice fisherman plays 1, and how to get off the pole slightly every time he runs out of the straight eight-character ring? Cut the thread?
The meaning of taboo is out of date.
How many line groups are there in raft fishing?
Use of valve stem
The valve stem is becoming more and more popular with fishermen, especially in winter, which often gives fishermen many surprises, so I have compiled three tips on the use and skills of the valve stem, and I hope you can join in.
First, what is a raft?
Raft rod, as its name implies, is a kind of fishing rod for fishing on a fishing raft, which belongs to plug-in fishing rod. Generally, there are 1.8m, 2. 1, 2m, 2.7m, etc. The rod body is provided with dense and compact steel wire rings, and the rod handle is provided with a fishing wheel fixing seat, which can be used to install reels of different sizes. Raft tips are generally made of glass fiber, which is thin, light, soft and elastic, and the conductor rings are painted with various colors to facilitate the observation of fish news. At the delicate point of the pole tip, the wind pulls the fishing line, which can bend the tip when it falls. A gust of wind blows, and the tip of the pole bends frequently, like a fish looking for bait. Careful anglers should distinguish between wind blowing and fish looking for bait. But it is the subtlety and sensitivity of the raft that is the essence of fishing crucian carp in winter. Less than one or two small crucian carp eat bait, the tip of the raft will have obvious "action", which is easy to observe Although the top of the raft is extremely soft, the handle of the raft is extremely tough, and a skilled throwing master can throw it 30 to 40 meters.
Second, the fishing group configuration
Every time I go fishing, I usually use two rafts, 1.8m and 2. 1m, which is too busy. When I meet a group of fish, I can only take care of one raft. I usually use a smaller model (2000 or 2500), with wide grooves and multi-shaft wheels, which have smooth air outlet and light rocking wheels. I usually use the No.2 main line as the main line and can't exceed the No.2 line, otherwise the sensitivity will be affected. It is enough to use the 1 secondary line. The hook is made of barb hooks of No.4-5 in tea. Facts have proved that as long as the wheel pressure of this combination is set properly, it is no problem to catch 10 kg of big carp. It is important to note that the sub-line should not exceed 1 line. The thinner the thread, the better, which is convenient for the inhalation of crucian carp. I have carefully observed that there is a difference of nearly 50% between the fish production of No.2 sub-line and that of 1. Similarly, the reason for choosing the red hook is to facilitate the inhalation of crucian carp. Because the first hook of tea is thin and the hook body is light, it is easy to feed crucian carp; Second, the hook is easy to deform under the action of external force, that is, it is easy to pull out even if it is hung on the bottom, and bending the hook back to its original shape after it comes out will not affect the use, thus reducing the probability of breaking the bottom. Don't worry about the deformation of the hook, as long as you walk properly. /kloc-there is absolutely no problem fishing under 0/0 kg. A fisherman once caught nearly 10 Jin of carp with No.5 tea, and the hook was not bad. Generally, three hooks are enough to tie the line, which is useless. I once tied a string of seven hooks, more than one meter long, but the two hooks below were usually fish. The hook spacing is about 15 cm, and the length of the sub-line is about 10 cm, which reduces the entanglement between hooks. I usually use 15-20g for lead pendants to reduce the chance of hanging on the bottom.
Third, fishing methods
Throw the fishing group to the center of the water, pull the rocker back to 2-3 meters when it falls, and the direction of releasing the raft forms an angle of 60-90 degrees with the fishing line. The bigger the angle, the smaller the chance of running fish. If the water is shallow, the angle between the rod tip and the water surface is large; if the water is deep, the rod tip of the raft is close to the water surface, which is convenient to reduce the angle between the fishing line and the bottom of the water, and is more conducive to bottom fishing of crucian carp. The important point here is the tightness of the lines. Because the raft tip is thin and soft, a small external force can bend the raft tip. The degree to which I tighten the line is that the tip of the pole is slightly bent, and even the fishing line has a great arc, but that's enough. It works best this way. Gently pull the crucian carp, and the tip of the rod will suddenly bend and vibrate. Never bend the tip like a bow, if so, the meaning of the raft will be lost.
Four, several kinds of pole images when fishing.
1. First, the tip of the pole vibrates slightly, and then it vibrates continuously and greatly. Generally, this kind of action rarely catches fish, and the rate of catching fish is above 95%.
2. If the pole tip is bent, return to the line immediately, which is the performance of the big crucian carp. Don't miss it. In this case, the fish rate is also above 90%.
3. Sometimes the weather is extremely cold, the crucian carp eats lightly, and the performance of the raft is strong bending, but the range is very small. At this time, some fish are lifting the raft in time.
4. Sometimes, when the small fish makes a hook, it only shakes intermittently. Fishing friends need long-term experience to distinguish between real mouth and fake mouth.
5. There is also a difference between the wind blowing and the action of the hook. The wind blows regularly and rhythmically, but the pole ......