Ace racing drift skill sharing
No. 1 handbrake drift
Operation method: the key sequence is direction key+drift key. Loosen the direction key and drift key at a suitable position to adjust the front of the car.
Scope of application: Handbrake drift is the most basic drift skill, which is suitable for most corners, but the speed loss is serious, so it is more suitable for beginners.
No.2 linear drift
Operation method: press and hold the brake key to keep a straight side slip when drifting.
Scope of application: linear drift is suitable for long U-shaped bends and short cuts-that is, bends that require the body to keep sliding for a long time to pass smoothly.
No.3 brake drift
Operation method: Before drifting, tap the brake key and then press the direction key+drift key to drift.
Scope of application: suitable for high-speed turning in narrow sections, avoiding hitting the wall or ensuring the drifting skills of sticking to the bend.
No.4 thrust drift
Operation method: Drift and float under turbine, nitrogen or other vehicle acceleration stunts, and the drift charge increases.
Scope of application: It is suitable for some small-angle bends with less than one tube of nitrogen.
Pendulum No.5 drift
Operation method: first press and hold the drift key, and then quickly slide from the reverse direction key to the positive direction key to float.
Scope of application: suitable for standard U-bend and most short cuts.
No.6 inertial drift
Operation method: press the direction key+drift key to float at the same time. When the body drift angle is small, release the drift key and click the direction key to control the body.
Scope of application: Suitable for most long corners with small angles and some corners or shortcuts with small angles that need to drift through.