One is to bite the lead with a 5b (1.85g) and clamp it directly on the secondary line of the hook 1 meter.
The other is to clamp a 2B lead bite on the main line near the 8-shaped ring connected by the main line and the sub-line, then clamp a b lead bite down to 1.5m, and then clamp a b lead bite down to1.5m. The fluency of the fishing group is obviously different.
Lead biting position:
1. In the environment of strong wind and slow flow, bite lead closer to the 8-shaped ring and concentrate, so that the effect of biting lead gravity to overcome wind is more obvious.
2. In the environment of low wind current, if it is to overcome the rising influence of the fishing group caused by the current, it should be fished in the middle and lower part of the secondary line.
3. In windless environment, lead biting can be concentrated near the eight-character ring, and lead is not caught in the sub-line; Or clip the small lead on the sub-line near the hook, but the bait will be stiff. When the underflow is disordered, if you want to stabilize the bait, you can stick to the hook and bite the lead with a trumpet according to the flow.
4. When there is wind and current, it is best to use sectional configuration to clamp the wires at different positions, namely, upper, middle and lower positions.