First, connect the front lead with the main line and leave it about 50~80 cm, or there is a principle that the GT segment of the front lead will not be put into the wire cup, and then tie a diamond pin or triangular pin at the front end of the front lead to quickly connect the throwing aid.
And then connected with the throwing aid by a triangular pin or a diamond pin. The throwing aid can choose floating throwing aid or slowly sinking throwing aid. Generally speaking, the throwing assistant needs to modify an American sub-clamp and a double-ring plus fast sub-clamp. The modified throwing aid can be quickly connected to the front guide, and the sequins of melon seeds can be quickly replaced.
It is enough to directly connect the melon seed sequin line group with the modified throwing aid, and the line group can be quickly changed according to the actual situation during the trip to adapt to the current fish situation. In addition, if the throwing aid is not modified, the throwing aid can be directly placed on the front wire. After the throwing aid is placed, the front end of the front wire also blocks the throwing aid with a pin, and the pin can be connected with the melon seed sequined wire group.
Methods of selecting fishing groups
1, select the line group with wild fish species.
When wild fishing takes crucian carp as the target fish, the overall size of crucian carp is small, mostly within 1 kg. At this time, it is not necessary to choose a large line group, but a small line group can be selected to improve the sensitivity. You can choose a line group of 0.8+0.6, and if you are afraid of running fish (encounter 1 ~ 2 Jin of crucian carp), you can choose 1.5+60.
2. Choose the line group according to the seasonal changes.
The change of temperature has a great influence on the activity of fish. In hot summer, the activity of fish is high; In the cold season when the temperature is low, the activity of fish is low. The higher the temperature, the higher the fish's activity, the greater the fish's strength and the corresponding pulling force. At this time, the line group can be appropriately selected to be larger.