What's the difference between hook drift and hook drift?

What's the difference between hook drift and hook drift? There are many differences between hooked floating and hooked floating, such as buoyancy, net weight, obstacles and their accurate measurement of water. To adjust the float with a fish hook, you should first find the bottom, wrap the lead seat with lead skin and then stick it, and continue to move the float until the tip and tail of the float are flush with the water surface, thus roughly measuring the deep water output. Then the float should be pulled down, and at the same time, the length of the fishing line should be increased, and the lead skin should be trimmed constantly to let the float emerge from the water. Finally, hang the bait rod and float to the surface for a few eyes.

The correct way to adjust the float is to roughly find the bottom: wrap the lead base with lead skin, throw it into the fishing position to ensure that all floats are not in the water, and then pull up the float until the screen is exposed. Pull and float: generally, the height line length of 1 plus 10- 15cm is needed, so that after hanging the double hook, the lower hook is 10- 15cm away from the bottom. Trim the lead skin: Trim the lead skin until the float is exposed. Check the drift tail: pull the drift tail into the water with a fishing rod to check whether it will return to the set mesh number. Double bait: pull up the float until the water is adjusted.

Expanding professional knowledge and adjusting drift are very important things in fishing. It has three purposes. The first point is to accurately measure the water level. Different fishing methods are usually used with different water levels. The second is to master the situation of the hook and bait in the water. Take double hooks as an example. Whether one hook touches the bottom and one hook goes undercover, or two hooks go undercover, or one hook leaves the bottom and one hook touches the bottom can be adjusted continuously according to different situations. The third is that it is likely to increase the appetite of fish. In the final analysis, the effect of fishing or baiting is to catch a lot of fish, so the same is true of drifting.

When fishing high and fishing low, the occurrence of multiple bites is mainly because Pisces is inhaling bait, which is a kind of "eating fish" method when fishing skillfully. Generally, the bait touches the bottom, and Pisces will eat the hook and push the fishing group for the first time.

Pay attention to the net weight of bait when improving fishing skills. After hanging the bait with the double hook, you can pull off the float a few times, so be sure to check it several times. For example, if the half-empty hook is adjusted to 6 meshes, and the prompt is 2 meshes after hanging double bait, then 1 mesh or water transfer is likely to appear when fishing for bottom. In order to catch more mouths, it is important to let the bottom hook touch or leave the bottom.

Reducing the fishing height and reducing the fishing height with multi-top drift is a form of "slow" drift adjustment, which is mostly used to catch larger fish and "slippery fish". These forms of bait are generally double bait, but lead is floating, which is more sensitive than traditional fishing.