Fishbone bolt method 1
This method, commonly known as Ni's hook method, wraps the fishing line around the hook handle for about two times, and then tightens it.
Hook and bolt method 2
After the fishing line is wound four or five times on the hook handle, pass one end of the previously reserved fishing line through the coil and tighten it.
Hook and bolt method three
Wrap the fishing line around the hook handle from the middle of the hook, then tighten it to reserve a coil, and then thread one end of the fishing line into the coil to tighten it.
Hook bolt method 4
Wind the fishing line from the lower part of the hook handle, and then wind it for a certain number of turns, leaving a part of the thread end taut. It is easier to catch fish when the hook tip is in the opposite direction, so try to put the hook tip outward after tying the hook.
Hook bolt method five
Wind the fishing line around the hook handle, then leave a part of the coil and tighten it.
Hook bolt method 6
Take a fishing line of suitable length and tie it to the hook. Make five or six turns around the hook handle. When the fishing line slides outward, block it with your fingers, and then slowly pull your head when it is tightened. The other hook uses the same system. After the hook distance is fixed, remove the double hook and tie the double line, and finally tighten the small circle.
The above is the summary of the knotting method in this paper. Many fishermen like to use the hook tying device, which is more convenient, but it is not. The best way is to tie it by hand, although it is a bit difficult, as long as they practice hard.
Learn more
20 thousand reading
search
Recognized as the most stable hook method.
Twelve hook methods
Twelve ways to tie a fishhook
The best way to tie a hook
13 illustrated encyclopedia of hook binding methods
0.5 small hook binding method