How to adjust four eyes to catch two eyes:
Adjust the float with an empty hook and a half water, adjust the weight of the lead weight to make the float surface for 4 meshes, and then hang the bait with a double hook to make the float sink into the water. At this time, adjust the position of the float upwards to make the bait surface for 2 meshes, and then fish.
Second, when fish float, they should readjust their floats:
The half hose bait adjusts the weight of the plumb sinker so that the floating objects can be fished out of the water for 4 eyes. When fishing, start fishing from 0.5 meters underwater, and adjust the position of the hook and bait to the depth of the fish layer according to the bait situation of the fish. When the bait signal is feeding, the float position should be adjusted downwards, and when the bait signal is black, the float position should be adjusted upwards.
Question 2: How to adjust the float is the easiest? Do you have a drift adjustment chart? The following are pictures and videos of drift adjustment, which I hope will help you. Illustration of fishing drift adjustment: fish 960/ line-13690-1-simple drift adjustment method illustration: fish 960/ line-10703- 1 drift adjustment video encyclopedia: fish 96438. & gt
Question 3: How to adjust the floating of fishing in a flowing river? Natural reservoirs, rivers, lakes and other places are fishermen's favorite fishing places. Wild fishing has a different kind of * * * and * *, which deeply attracts us. Of course, if you want to enjoy the fishing pleasure brought by wild fishing, you must master this fishing skill flexibly.
Here is a detailed explanation for fishing friends, related knowledge of wild fishing and drifting. Wild fishing is suitable for slow fishing. Leveling without hook can catch 1 ~ 2 mesh. At this time, the eight-character ring touches the bottom, and the sub-line is undercover, aiming at the bottom fish and big fish. Generally, it is 1 ~ 2 mesh in storm, and 3 ~ 4 mesh in storm. The following will be discussed from two aspects: examples and reasons.
I. Schematic diagram of drift adjustment of wild fishing
No hook, semi-water suspension, leveling water (floating tail is just flat, or slightly exposed). Then, hang the auxiliary line and hook bait, and move the float up so that the tail of the float is exposed 1 mesh. You can also adjust 1 for Fishing 2 and 1 for Fishing 3.
Using single hook for wild fishing can avoid the twining of the sub-line, reduce the bottom hanging and make it easier to adjust the drift, but using double hook will increase the chance of catching fish. If the bottom of the water is uneven, you can fish more or less.
Second, matters needing attention in the adjustment of wild fishing drift
The quality of bleaching now refers to sensitivity, workmanship, paint quality and exquisiteness, which has little to do with bleaching. If you float well, you can master the fish situation well. When to adjust 4 fishing for 2, 5 fishing for 2, 6 fishing for 2, and 6 fishing for 3? Now, there are all kinds of adjustments, and there are 2 uses for horizontal fishing, and the floating seedlings are also long. 10 is used more. The less you adjust your fishing eyes, the smarter you are and the duller you are.
According to the fish mouth, the drift is adjusted reversely to achieve the best ideal effect. In addition to judging the analysis of the hook according to the adjustment of eyes and fisheye, we can also analyze the state of the hook bait in the water according to the eating reaction of the fish. Here is a summary:
1. The lower you go, the more you hook.
2. The more you send, the heavier the hook.
3. There are many slips and floats, and the buoyancy is small.
4. More jitter and greater buoyancy.
5. Multi-tail, split line bend.
6. Always rake the fish and hook it at the bottom.
7. How empty the pole is, how light it will fall.
8. Drifting is often oblique, with fish cut.
Question 4: Adjustment Skills of Fishing Drift Fishing is also called semi-water fishing. Beijing fishermen often call it pulling drift, which means that crucian carp, which are used to foraging under the water, will try to attract them to the middle of the water to eat. Its advantage is that it changes the simple practice of letting the bait reach the bottom from the water surface, and shortens the process from fish biting to immediate biting when the bait enters the middle or lower water. Therefore, when fish ponds, weather and other conditions are suitable for floating fishing, the yield difference between bottom fishing and floating fishing is often more than double. It can be seen that fishing drift plays an important role in the process of fishing crucian carp.
Although fish drift is a good technique for fast fishing, it must be used properly and seize the opportunity. I have seen some fishing friends hear that fishing floats fast, so as long as a fishing rod is set up by the pond, it will float immediately. The result is just the opposite. The reason is that these fishermen did not correctly grasp the timing of fishing.
Before the fishing fashion in Taiwan Province, there was a saying that fishing drifted. At that time, the main target of fishing was fish accustomed to the middle and lower levels. Especially when the weather is hot and the air pressure is low, grass carp and other middle and lower-level fish will swim to the upper and middle levels to feed. At this time, the method of fishing and floating often gains something, but rarely catches crucian carp.
The float for fishing in Taiwan Province is different from the previous float. It lures the crucian carp, which is used to foraging at the bottom of the water, to the middle layer of the water by using the water-soluble property of Taiwan Province bait. So there is a process of pulling, and there is a timing of pulling, and the timing of pulling is crucial. My personal experience in pulling and drifting is that the ratio of the floating weight of the floater and the plumb bob used for fishing can be the same as that of the bottom fishing in peacetime (some fishermen use the floater whose buoyancy matches that of the plumb bob when fishing, and change it into a floater with a little more buoyancy when fishing), and fish the bottom first after throwing the hook. At this time, it is necessary to constantly lift the rod and change the feed, so that the feed hanging on the hook can be separated from the hook in the process of lifting the rod and slowly scattered from the middle to the bottom under the resistance of water. As we all know, the feed for Taiwanese fishing is mostly puffed plant matter, which will dissolve in water soon after entering the water. In the process of repeatedly lifting the pole to change food, the bait keeps spreading and melting from top to bottom, and gradually forms a three-dimensional foggy bait nest from the bottom to the middle and lower levels.
Fish can only smell the bait in this three-dimensional trap, but can't eat the actual bait, so when the hook with the bait slowly falls into the water, the fish will compete for the bait. When the frequency of fish biting the hook increases, it is often that the hook thrown into the water falls to the bottom or is about to fall to the bottom (reflected by the irregular jitter of the float just after it has landed on the pre-calibrated net), so it is necessary to consider starting fishing.
The requirement of fishing float is to move the float down 20-30 cm (in the direction of the hook) first, and then continue fishing. At this time, in the process of landing the hook, there will be the possibility of fish biting the hook; If the hook continues to drop, the float will naturally disappear into the water, and the fisherman should shake his wrist and lift his pole in time to change food. At this time, fish often take the bait. After repeated several times, if the fish bites the hook in advance, the float should move down 20-30 cm; On the other hand, if the float falls into the water several times and there is no fish after lifting the rod, we should consider moving the float up a little (in the direction of the fishing rod). Repeat this action until the hook is 50-70 cm from the water surface as the ideal depth.
Question 5: Why does crucian carp float? I don't know what fishing method you use. Generally speaking, it is nothing more than Taiwan fishing and traditional fishing!
Fishing in Taiwan Province:
1. Assemble the wire assembly and install the float and double hook. The float is about 30 cm away from the sub-line. Add lead (extra) to the lead base and pull the float into the water.
2. Adjust the distance between the float and the auxiliary line until the float is 1-2 mesh above the water surface (find the bottom).
3. Pull the float up 20 cm, and then the float will sink to the bottom again.
4. Cut off the lead skin gradually with scissors until the floating tail reveals the desired mesh number (such as 3 mesh or 4, 5, 6, 7 mesh), which is the number of "tune" adjusted several times. The specific mesh number should be comprehensively considered according to the performance of the float you use, the target fish, the season, the severity/fierceness of the fish mouth and many other factors. Remember to wrap the lead cover tightly on the lead cover seat after adjustment.
5. Double hook bait (feeding), note: keep the general size of each feeding. At this time, the float will sink into the water again under the gravity of the bait, and gradually adjust the float until the tail of the float comes out of the water to reach the number you want. This number is the number of "catches" that have been adjusted several times. For example, if you show your eyes, you will catch 1.
6. The above are the most basic bleaching methods, so you should learn so much first. The so-called "four fishing and two fishing" is a simple formula set by the earliest dharma drift, which is not suitable for the current fishing method. The specific adjustment of several catches needs specific analysis. This is a complicated theory. Take your time.
Suggestion:
1. Float is made of balsa wood or reed.
2. Floating-point numbers should be between 0 and 2 and should not exceed 2.
3. Start with rubbing the bait, and don't practice pulling the bait too early.
Traditional fishing methods:
1. Pull the float closer to the hook (it can be pulled to the bottom);
2. Throw the float into Hanoi and observe the state of the float;
3. If the fish floats into the water, it means that the lead skin is heavy, and vice versa;
4. Increase or decrease the lead skin with small scissors until the tip of the float floats up and down on the water surface; That is to say, at this time, the fish float is upright in the water, and the fish tip floats up and down in Shui Pi. Adjustment completed.
5. Pull up the float gradually until the tip of the float shows two eyes (where you want to fish) and find the bottom.
6. Take the bait and start fishing.
Question 6: What's the difference between floating fishing and bottom fishing? How to adjust the float in floating fishing? Floating fishing means that both hooks are in the middle of the water. Actually, it's also called bottoming, but it's a little far from the bottom. To take off the bottom is to rub a big bait and hang a hook to find the bottom. For example, your drift is adjusted to four eyes. Hang a big bait to let the float leak out of four eyes. Pull down, how many centimeters, and slowly find the fish layer.
Question 7: Crucian carp is 20 cm from the bottom. If the fish drifts, please ask the master how to adjust it. I'll tell you the simplest method I often use. First, increase the fishing drop until the float directly sinks to the bottom of the water, then the float has sunk to the bottom of the water, and then lift the pole to adjust the float back to "the float tip is parallel to the water surface". Then lift the pole, peel off the lead, shrink it a little, and then put it in the water to reduce it to 89 meshes. It is also the last eye or the penultimate eye, so that the hook below is off the bottom. At this time, you can lift the pole to make the float close to the lead pendant about 10-20 cm, which basically means that the hook is about 20 cm from the bottom of the water. Using my method is much better and simpler than what they do online. Basic bleaching is completed in three steps. I also like fishing. They are all people who love fishing. Some things are explored and thought by yourself. Don't always look at other people's methods as true. Maybe your own idea is better than others'.
Question 8: How to adjust the drift of fishing in the four seas? Fishing by pulling bait and rubbing bait. It needs strong basic skills and good bait state to be used in specific fish situations. For example, when the fish can't get to the bottom of the fish, it is very difficult to pull the bait down, and there are many empty rods. At this time, you can use bait to float. In this case, the target fishing is generally adjusted to raise the eye or even the target is in place, so that the bait will slowly swing down during the swinging process and the main interface will be used. When the target tip enters the water, the rod will be lifted and thrown again. At present, bait is the most commonly used method. Generally, bait is used when the fish's activity and density are high, and the fish will leave the bottom for food. Bait needs a certain rhythm and frequency, and it also needs a high bait state. There are many ways to adjust the target according to different fish conditions and bait conditions. The most common fishing methods I know are as follows: 1. Fast fish. When the speed of the fish is above 200, you can adjust your eyes to look at the head and turn over after entering the water. Under normal fish conditions, fishing is normal. Generally, it can be adjusted in 3-5 meshes. After pulling the bait like water, watch the target turn over, climb to the top, accelerate the sinking, and pause during the sinking.