Diamond knot: make a lighter, blue line and orange line. Butt the blue line with one end of the orange line with a lighter. Then wind the blue line around the orange line. Step 3: Wrap the orange thread around the blue thread again, and then pass through the blue ring.
Step 4, shrink the blue coil and the orange coil. Step 5, wrap the orange coil on the back and then thread the blue coil. Step six, the blue line goes around from the back and goes into the orange coil. Step seven, repeat step five. Step 8, repeat step 6. Step 9, repeat the previous knitting method and weave to a suitable length.
Note: the shape of diamond knot is similar to that of snake knot. The difference is that the diamond knot is thicker, denser and stronger, with double lines at both ends, while the middle part is more in line with the snake knot.
Extended data:
The eight-character knot is simple and easy to remember. Usage: It can be used as a temporary or simple stop and braking point on the rope. Features: even if the two ends are pulled tightly, they can still be easily untied.
Usage of flat knot: Tie the two ends of the same rope together. Suitable for connecting ropes with the same thickness and material; But it is not suitable for ropes with rough and smooth surfaces.
Features: once the winding method is wrong, the result may become an incomplete slipknot, and the knot will spread when stressed. If the knot is pulled too tightly, it will not be easy to untie; However, if you hold the end of the rope with both hands and pull it hard on both sides, you can untie it easily. Secret: Left and right, left and right.