What tools do you need to clean the glass curtain wall?

Several methods of cleaning the glass of the external wall \x0d\ Contemporary buildings are mostly high-rise buildings, and the external walls are decorated with tiles of various materials. In order to keep the appearance of the building clean and beautiful, the external walls should be cleaned regularly. The glass curtain wall and glass window of high-rise building are easy to be attached with dust, which needs to be wiped frequently to keep the building beautiful and tidy and the room bright. Cleaning the exterior wall and glass of the building needs to be wiped frequently to keep the building beautiful and clean and the room bright. Cleaning the external walls and glass of buildings requires outdoor and aerial work, and vehicles such as hanging baskets, hanging plates and lifting platforms must be used, which is difficult and dangerous. Operators must undergo strict physical examination, strict training, and strictly abide by operating specifications and safety specifications. \x0d\\x0d\ high altitude glass cleaning method \ x0d \ 1. First, check the job site and determine the job plan. Focus on the roof and confirm whether hanging baskets and hanging plates can be installed; When the roof moves, the hanging basket and the hanging plate can be contacted; Whether it is neon lights, advertising boards, etc. Obstruct homework, etc. \ x0d \ 2。 Install the vehicle hanging basket or hanging plate. If window cleaner is installed in the building, the pre-operation inspection shall be carried out according to the specifications. \ x0d \ 3。 Prepare wiping tools, including buckets, detergents, rollers, rubber brooms, towels and spare auxiliary tools, such as shovels, scrapers and solvents. \ x0d \ 4。 Operators carry tools on hanging baskets or hanging plates. Some tools should be tied to hanging baskets or hanging boards with elastic ropes to prevent people from accidentally falling from the sky. Set protective ropes and safety signs on the ground. \ x0d \ 5。 The operation mode is from top to bottom. After wiping the first slip, tidy up the tools, add detergent, move the hanging basket or hanging board horizontally, and then continue the second slip. \x0d\ 6。 Method of wiping the glass: \ x0d \ Check whether there are any stains such as adhesive on the glass. If there are, first remove them with corresponding auxiliary tools and solvents such as scraper. \x0d\ Dip the wool roller into the bucket, and after the detergent is completely inhaled, gently touch it with your hands (it is advisable not to drop water) and evenly smear it on the glass. When smearing, it generally rolls from top to bottom and moves horizontally, and each raceway should be pressed and crossed to prevent coating leakage. \x0d\ Scrape the cleaning agent on the glass with a rubber roller. When operating, press the scraper evenly on the glass with a little force, scrape it slowly from top to bottom, clean it once, wipe it with a wet towel, and then move it horizontally to scrape another line. \x0d\ After scraping the glass, clean the window with a towel. \x0d\ Confirm that the glass within the scope of one operation has been wiped, slide the hanging basket or hanging plate, and continue the operation. \ x0d \ 7。 After all operations are completed, tidy up the tools and remove the ground guardrail and bulletin board. \x0d\ At work, both the roof and the ground should be supervised and kept in touch with the walkie-talkie. \x0d\ Find out the condition of the roof. \x0d\ Determine the water source and power supply. \x0d\ Confirm the wall material and dirt degree, so as to select the appropriate cleaning agent and tools. If necessary, a small cleaning test should be carried out. \x0d\ Make an operation plan. \ x0d \ \ x0d \ 2。 Install the vehicle. \ x0d \ 3。 Prepare cleaning equipment and tools, including high-pressure cleaning machine, rubber hose, bucket, roller, rubber broom, towel, scraper, cleaning agent and solvent, etc. \ x0d \ 4。 Connect the high-pressure washer to the power supply, water supply and numbered cleaning hose. \ x0d \ 5。 Operators should bring tools and cleaning agents to the hanging basket or board. Some tools should be tied to hanging baskets or hanging boards with elastic ropes to prevent people from falling from the sky. \ x0d \ 6。 The operation mode is from top to bottom. \x0d\ 7。 Cleaning method: \ x0d \ Clean the wall with hose or water gun connected with high-pressure cleaner. \x0d\ Check the wall for adhesion and other stains. If there is, first use scraper and other corresponding auxiliary tools and solvents to remove it. \x0d\ Immerse the wool roller into the bucket, fully inhale the cleaning agent and evenly spread it on the wall. \x0d\ Use brushes, millstones, scouring pads, rubber rollers, etc. according to the dirtiness of the wall. Polish it and then rinse it with clean water. \x0d\ Confirm that the wall surface within the preliminary operation scope has been cleaned, slide the hanging basket or hanging plate, and continue the downward operation. \ x0d \ 8。 After all operations are completed, tidy up the machinery, equipment and tools, remove the ground guardrail and bulletin board, and wipe away the accumulated water on the ground. \x0d\\x0d\3。 Operation method of hanging basket \x0d\ 1. Composition of hanging baskets \ x0d \ Hanging baskets used for building cleaning are mostly medium-sized hanging baskets, with a length of 3 meters, suitable for two people to work. Hanging basket is mainly composed of basket body, hanger and lifting system. \x0d\ 2。 Hanging basket assembly procedure \ x0d \ Check to ensure that the components are complete, qualified, safe and reliable. \x0d\ Install the suspension bracket according to the instructions of the hanging basket. \x0d\ Install the lifting system and connect it with the hanging basket. \x0d\ Test run and confirm good performance. \x0d\3。 Operation of the hanging basket \ x0d \ 3m Generally, the hanging basket is operated by two people. After the operator enters the hanging basket with cleaning tools and cleaning agents, he will first lift the hanging basket to the top of the building and then gradually descend. After cleaning once, move according to the preset trajectory, and then clean again. \ x0d \ x0d \ 4。 Operation method of hanging disk \ x0d \ 1. The hanging plate consists of hanger, rope (diameter 16mm, length depends on building height), hanging plate, safety belt and safety sliding lock. Before use, carefully check whether the functions of each component are effective. \ x0d \ 2。 Fix two large ropes (bearing rope and safety rope) on the safe and reliable riveting point and bracket respectively, and put them down from the roof after inspection and acceptance by special personnel. Rubber ring or safety pad should be added to the contact part between the rope and the corner of the building. \ x0d \ 3。 Connect the hanging plate, safety slide lock and heavy load rope. \ x0d \ 4。 The operator should fasten the safety belt and connect it with another rope (safety rope) through the safety sliding lock. \ x0d \ 5。 The operator puts the spare tools such as operation in his pocket, and then enters the hanging board and goes downstairs, in a hanging state. At this time, with the cooperation of roof personnel, tools such as buckets and rubber brooms are sent down and scraped on the hanging board by operators. \ x0d \ 6。 Work while descending until the end of a trip, then descend to the ground and unload the bucket, hanging plate, etc. And then go to the roof to start the second trip.