Diagram and drift adjustment of all-flying lead fishing method

The schematic diagram of full flying lead fishing method and drift adjustment method is as follows:

Tools/raw materials:

Floating, floating lead.

The method is as follows:

1. First of all, we should be ready to take the lead. When fishing, we must try to use a small drift, which is good for us.

2. Then we need to prepare the pendant, because the pendant falls to the bottom and floats small, so the reaction force of our hook will be small.

3. When we are fishing, if the news of fish is reflected in the float, our float will be stronger.

4. Finally, we have to float the eye bar up and down, and there must be more obvious activities. This is our lead fly fishing method.

Flying lead fishing, commonly known as lifting lead fishing, has a simple principle, that is, changing the position of the lead weight to change the waterline and sub-line length of the fishing group, and changing the sub-line and sub-line length to change the "trajectory" of the fishing group after entering the water, thus achieving the purpose of catching some fish.

The longer the sub-line, the larger the swing amplitude of bait and the longer the arrival time; If the waterline becomes shorter, the standing and positioning of the float will become faster, so that the earlier fish mouth can also be reflected on the float. Therefore, the characteristic of flying lead fishing is to dynamically lure fish, and the season of catching fish is early enough.

Flying lead fishing method can also be divided into semi-flying lead and full-flying lead, which actually means that the distance of lead falling is different. Half-flying lead fishing can be understood as lead falling between the eight-character ring and the floating seat, and any position in this interval can be called half-flying lead. If you pull the lead pendant under the floating seat, it is completely called flying lead, and it is also called fishing for Shui Pi.