1. Prepare the material, thread the needle and tie the end of the thread. As shown in the figure below, the needle and thread pass through the cloth.
2. The drawn needle thread passes through the loop of the thread head, and the thread is tightened.
3, the effect is as follows, the purpose of this is to prevent off-line.
4. Thread the needle as shown in the figure below, and pull out the needle and thread.
5. Insert the next needle after the previous needle exit point (1/2 needle pitch) and exit the needle before the previous needle exit point (1/2 needle pitch) to tighten the needle and thread.
6. stitch a few more stitches like this and look at the stitches in front.
7. This is the reverse seam, and the reverse seam method has been introduced.
8 Of course, you can also make the following number of stitches (dotted effect on the front), and the exit and entry points should be the last needle entry and the spacing between the exit points should be 1/4 needle spacing. The method is the same as step 5.
Hand needling covers a wide range of contents, and the needling methods are also varied:
Commonly used needle methods include walking needle, fixed needle, mixed needle, reverse needle, sewing needle, triangular needle, needle insertion, flower tension needle and so on. As far as home sewing clothes is concerned, buttonholes, buttons, corners, hemming, sewing, knotting and nailing are all inseparable from manual sewing.
The stitch of the hand needle can be long or short, and the suture can be tight or loose; Some can't see the suture in front; Some can be sewn between two layers of cloth, anyway, there are no stitches on both sides; Some can also sew various stitch patterns for decoration. If the needle is returned, it is safer than the sewing machine.