Do you need to make a splay ring on the fishhook line? How to make a figure-eight ring?

Connecting the double hook and the auxiliary line: Take the prepared auxiliary line, wind it for 6-8 times to tie the fish hook, and then tie the other fish hook in the same way. Fold in half: according to the specific needs, control the hook distance at about 3 cm, and then fold in half to divide the line. Pass through the Figure-8 ring: Pass the folded part of the sub-wire through the Figure-8 ring, and then tie a slipknot clockwise at the passing end. Then put the hook through this slipknot and tighten it at last. First, do you need to tie a figure-eight ring on the hook line? Hook and auxiliary line connection are generally needed. After the hook is connected to the secondary line, it needs to be connected to the 8-shaped ring, and then the 8-shaped ring is connected to the main line, and then all the tools can be connected together in the correct order to start fishing.

Second, how to tie the hook line to the eight-character ring 1 and connect the double hook with the auxiliary line: generally, when fishing, use the double hook. At this time, the double hook needs to be connected to the secondary line. Take the prepared sub-wire, first put a hook on one side, and take the way of winding, generally 6 to 8 turns is the strongest. Then install the hook on the other side in the same way, so that the double hook and the auxiliary line are connected together.

2. Folding: After that, it is the folding line. In the process of folding in half, a particularly important aspect is to pay attention to the hook distance, which can be controlled at about 3 cm according to specific needs. After determining the hook distance, fold the polyline.

3. Pass through the Figure-8 ring: After folding in half, first pass the folded part through the Figure-8 ring. Tie a slipknot at this end clockwise, and then put the hook through the slipknot. After passing through, just tighten it.