1, using alcohol
Alcohol is a good solvent. After the rubber surface is heated and softened by a blower, alcohol is sprayed on the surface. After alcohol dissolves stubborn glue, wipe it off with a towel. If the glue is thick, you can dip a soft cloth in alcohol, rub the glue directly, and scrub it directly after softening.
Step 2 use essential balm
Essential balm contains menthol, eucalyptus oil and clove powder, which is equivalent to alcohol and belongs to organic solvent. Dip it with a cotton swab, smear the sticky part, and wipe it with a towel after dissolution. If the glue is dry and hard, soak it in alcohol or wind oil for a while, then use a cleaning shovel.
Step 3 use glue remover
If you want to do it in one step, you can buy a bottle of glue remover directly, which is inexpensive, faster and easier to clean, and can be used in many places at home.
Step 4 Use banana oil
Banana oil, a thinner with relatively high concentration, can be used to remove it, but the surface of the material cannot be painted, otherwise the paint will be brushed off together. Scrape off the foam or sponge residue with a hard object first, and then wipe the adhesive position of the foam with an oil brush dipped in banana oil.
About 2 minutes, dilute the foam glue, and then brush it in circles at the position where the foam glue is glued. When the glue falls off, it can be cleaned and dried.
Step 5 use a hair dryer
You can press the hot air button with a hair dryer to blow air at the position stained with foam rubber. After blowing for a period of time, the foam rubber will become soft, so the adhesion of the foam rubber will be weakened and it will be easy to remove.