Take a piece of colored rope.
Mark the starting point and tie a slipknot as shown.
Take out the long thread from the hole of the slipknot.
Repeat this step all the time
You can pull the thread when it is long, but you can't pull it off.
Weave to a suitable length and take out the thread (the thread should be written in length) to form a fast knot, so that the part of the rope is completed.
Weaving of slipknot
In a section of the rope, wrap your fingers twice.
The rope goes through the back.
The other rope also passes through and is tightened, and the elastic adjustable slipknot is completed.
Tie two knots.
Cut off the extra parts.
The multicolored rope is finished.
Multicolored rope (improved simple method)
Put a rope ring on your finger.
Continue to cover two circles (note that the circles should be aligned and not crossed).
Put the bottom ring in the middle.
(Note that the rope loops should be aligned and not crossed. )
Continue to put a rope loop on your finger.
Then put the bottom ring in the middle.
Continue to put the loop, and then put the last loop in the middle.
Repeat these steps until the appropriate length is reached.
Leave the last lap on your finger.
Place the first and last rings as shown.
Thread the rope of the right hand into the ring of the left hand.
Final tightening
accomplish