Who has a schematic diagram of the fastening of the cow buckle rope?

Fastening: firstly, fold into a circle, then pass the thread end through the circle, hold the thread end with one hand, and wind the wire rope around the thread end with the other hand, then pull it out of the looped wire rope, then put it into the circle, and finally return along the threading direction, leaving a sleeve to tighten the wire rope.

1 Introduction, semi-knot hand knot: the basic knot of all knots. Usage: to prevent slipping, or when the end of the rope is not open, it can be used as a temporary method to prevent further loss of the line. Disadvantages: When the knot is too tight or wet, it is difficult to untie it.

2. Introduction to the eight-character knot: the gameplay is simple and easy to remember. Usage: It can be used as a temporary or simple stop and braking point on the rope. Features: even if the two ends are pulled tightly, they can still be easily untied.

3. Use of flat reef knot: tie the two ends of the same rope together. Suitable for connecting ropes with the same thickness and material; But it is not suitable for ropes with rough and smooth surfaces. Features: once the winding method is wrong, the result may become an incomplete slipknot, and the knot will spread when stressed. If the knot is pulled too tightly, it will not be easy to untie; However, if you hold the end of the rope with both hands and pull it hard on both sides, you can untie it easily. Secret: Left and right, left and right.

4. Introduction named Bowline: Known as the king of knots, it is the most popular knot in the world, and it is frequently used in various outdoor sports and even in all walks of life or daily life. Usage: When the rope is tied to other objects or forms a circle at the end of the rope, it is characterized by easy knotting, easy unfastening, high cooperation and warranty safety, wide use and many kinds.

5. Introduction of double knot lilac knot: the beginning and end of other knots. Usage: usually suitable for articles with equal stress at both ends, and suitable for horizontal stretching. Features: extremely safe, however, if only one end of the rope is forced, the double knot may be thrown off or loosened.

6. Introduction of three groups of knots for shearing: The function is the same as that of double knots, but it is stronger. Usage: Suitable for vertical traction. Others: Also known as rolling hitch, Magnus hitch, tension line hitch and stop hitch.

7. introduction of 7.Fishermans knot: this kind of knot is very easy to tie, but it is difficult to disassemble. Therefore, it is necessary to avoid using it on some ropes with good texture, and it is not good to use it on ropes that will be tightened, because it is difficult to untie after tightening. Usage: Connect two ropes together, usually hard and soft.