1, the rope of the pole should not be too long, and it should be one to two centimeters after playing;
2. The connection between the main line and the pole rope should be firm and cannot be easily loosened;
3. Try not to hurt the main line during the connection process, so as not to break the line and run the fish when the fishing rod is stressed;
4. During use, the rod rope should not be entangled with the main line, so as not to affect the normal fishing;
5. The main line is easy to assemble and disassemble, not too complicated and complicated.
First, make a ring buckle at the top of the main line, with the circumference of the ring buckle controlled at about 10cm, and tie it with a splayed knot;
1. Select a spatial bean greater than or equal to twice the diameter of the main line. It is appropriate to choose round beans for space beans, and the rings are buckled together and sleeved outside the rings.
2. Then tie a splayed knot at the top of the ring buckle to form a small ring buckle. The small ring buckle is as small as it can be, and the size is subject to being pinched by hand.
3. Tie an ordinary knot on the pole rope, and of course you can also tie a splayed knot. The shorter the knot, the better. The longer the knot, the easier it is to increase the probability of winding.
4. Pull the space bean to the bottom of the big ring buckle, wrap the big ring buckle into a horseshoe buckle, put on a red rope, tighten it, and then push the space bean upward to lock the buckle.
5. When the main line needs to be dismantled, loosen the space bean first, and then gently pull up the small ring buckle, and the horseshoe buckle will be automatically loosened, so that the main line can be dismantled.