Floor tile is a kind of floor decoration material, also called floor tile. Fired from clay. Various specifications. Strong quality, pressure resistance, wear resistance and moisture resistance. Some are glazed and have decorative effects. Mostly used in the ground and floor of public buildings and civil buildings.
There are many kinds of floor tiles, and there is a lot of choice. According to the material, it can be divided into glazed tiles, whole-body tiles (non-slip tiles), polished tiles and vitrified tiles. As a kind of floor material laid in a large area, floor tiles use their own colors and textures to create different styles of living environment.
1, outdoor floor tiles are uneven, rough in texture and easy to hide dust. Outdoor floor tiles include square bricks and lawn bricks.
2. Square bricks are mainly divided into ordinary square bricks, roof bricks and indoor supermarket bricks.
3. Ordinary square bricks with blind road bricks and stop bricks are generally yellow, gray and black. Because of its superior anti-slip, wear-resistant and decorative aesthetic properties, it is widely used in leisure squares, municipal engineering, supermarkets, 4S shops, landscaping, beautiful roofs, garden balconies and crowded public places. It has the characteristics of non-slip, wear resistance, beauty and convenient maintenance, and is an ideal floor and roof decoration material for modern urban construction.
4. Lawn bricks can be prefabricated into various specifications and colors, inlaid with various patterns and assembled into different patterns as required, which is more beautiful than cement floor, and can reduce glare caused by ground reflection, reduce the reflection of ground radiation and reduce the transmission of hot air at the bottom. Lawn brick is widely used in urban road reconstruction, park construction, community greening and so on.
How to lay outdoor floor tiles?
1, according to the design drawings or design requirements, find out the color and pattern of floor tiles. Choose defective floor tiles. This can prepare for the later work in advance.
2. After the floor tiles arrive, they need to be sorted, and remember to put them in a safe place to avoid damage.
3. The floor tiles should be soaked before laying to prevent the water absorption of the floor tiles from absorbing the moisture in the cement, causing tensile cracking.
4. The ground needs a spoon or water pipe to wet the ground base. Reduce dust during this operation. It also allows the ground to absorb some water. There will be no shortage of water.
5. Next, it is the mixing of cement cushion. The volume ratio of cement and sand for floor tiles should be about 1: 5, and the thickness should be about 3cm. The bonding layer and floor tile should be laid in sections at the same time, and bonded with cement slurry or dry mud.
6. After the floor tile is stained with cement oil, it should be patted slowly with a rubber hammer to reach the leveling standard. Remember, cement oil must be smoothed, otherwise it will be easy to empty the floor tiles in the future.
7. Within half an hour after pasting, the surface of floor tile surface shall be wiped clean, smooth and solid with a rag; The flat-fell seam width between porcelain plates should meet the design requirements, and the flat-fell seam width should not be greater than 2mm. Unless there are design requirements. Antique bricks are another consideration.