?Time flies like water, another year has passed, and the work has come to an end for the time being. Writing a maintenance electrician work plan will help us carry out the work in the new year and make ourselves fully prepared before working in the new year. How to highlight the key points when writing a maintenance electrician's work plan? Below is the "Collection of 7 Personal Work Plans for Maintenance Electricians in 2023" that I compiled for you. Welcome to read, I hope you can read and collect it. Maintenance electrician 2023 personal work plan collection of 7 articles
?20xx is the first year that I entered ** company. Generally speaking, 20xx is a year of greater harvest. At the same time, I also discovered Your own shortcomings need to be strengthened. The purpose of writing this summary is to absorb experiences and lessons and formulate plans, goals and outlines for your future work.
?I joined the company on July 26, 20xx, and the first project I worked on was the Chanba Peninsula building intercom and indoor emergency alarm system, which lasted for more than half a month. In mid-August, I went to Lanbo Bay, Yanliang, to install a fire alarm system for two months. After November, the Yanchang Petroleum Hotel in Yan'an also had a fire alarm system until the end of January 20xx. During this period, I installed fire-fighting equipment in a hotel in Pucheng, and was sent by the company to study fire-fighting system debugging in Zuoanchun, Yuhuazhai. These experiences have enabled me to gain a lot in my knowledge and experience in weak current, and I have built up confidence and determination to do a good job in the future.
?He summarized his work in 20xx as follows:
?1. Establish an overall concept in weak current construction, do his job well, and cooperate with various departments to complete the project progress. At the same time, during the construction period, the company's employees must fully cooperate to establish the company's image so that the company can remain invincible in industry competition.
? 2. We must strengthen our communication and coordination skills during construction. In our project construction, communication and communication are crucial links:
?1. With Communication with company leaders includes reporting project progress and on-site construction status to company leaders. I did not do a very good job in this regard last year. I always had to report only when the leader asked, and I will report immediately in the future;
? 2. Communication with various departments of the engineering department, including technology, materials, construction planning, etc.; 3. Communication with colleagues in the company, including technical communication, safety construction and other matters. Only by good communication can construction be smooth. .
? 3. Be proficient in professional skills, be diligent in on-site observation, master relevant specifications and technical standards, and work harder on integrated wiring and the working principles of each system. Familiar with the drawings of each construction site, study the rationality and convenience of construction of the drawings, improve work efficiency faster, do a good job in technical exchanges and mutual learning at work, and communicate with company technicians or manufacturers in a timely manner if problems arise. During the work, we constantly summarize the construction experience and skills. At every stage of the construction, we must study with concentration, ask if we don’t understand, be diligent in using our brains, and flexibly handle various "difficult diseases" in the construction.
?After making the above summary, I formulated the 20xx work plan for myself as follows:
?1. Communicate and coordinate with the company and the engineering department to ensure that the next The work is going smoothly;
? 2. Communicate more with colleagues to create a united, capable and combative team;
? 3. Learn from the experience of 20xx Learn the lessons and continue to carry forward the advantages in the work in 20xx to avoid certain mistakes in 20xx, such as construction safety and some technical errors during construction;
? 4. Collect relevant technologies related to weak current by yourself information, and study hard after work. Learn CED drawing.
?The above is my summary of my work in 20xx and my work plan for the next year. Making this summary plan is an answer and expectation for myself, and it is a challenge and challenge to face the challenges of the new year. Strategy, I firmly believe that only hard work can get rich rewards.
?In 20xx, I will devote myself to work with a new self. I am confident to complete this year's work. Finally, I wish the company’s business a prosperous future!
? February 9, 20xx, maintenance electrician 2023 personal work plan collection 7 articles part 2
?Water supply, drainage pipes and sanitary ware installation project
? Water supply pipeline renovation (this specification only selects commonly used PP-R pipes)
?PP-R construction procedures and methods should comply with the following regulations:
?a) Construction according to design requirements Pipe troughs, cut pipes.
?b) Use a hot melter to heat and connect the cut pipes and connecting pipe fittings. When connecting, hold the pipe in your hand and directly enter the connecting piece hole, and wait until it cools before letting go.
?c) Use special pipe fitting clips to firmly fix the water pipes in the concealed groove. Hollow brick walls should be fixed with iron nails and diagonal nails.
?d) When the hot and cold water pipes are parallel, the basic principle of hot at the top and cold at the bottom should be followed. If possible, space the hot and cold water pipes 50mm apart as much as possible. When hot and cold water pipes come out of the wall, the principle of hot on the left and cold on the right should be followed.
?e) After the pipeline connection is completed, the end of the pipeline and the connection part with the water outlet should be blocked with a plug first, and a pressure test should be carried out. The general regulation is 6kg, and our company requires a pressure of 8-9kg.
?f) After testing the pressure for 30 minutes and confirming that there is no leakage (signed by the customer or property management or quality inspection), fix and seal the pipeline.
?g) The thickness of cold water pipes in closed walls should not be less than 8mm, the thickness of hot water pipes should not be less than 10mm, and the thickness of pipes embedded in the ground should be less than 10mm. )
?Technical points should comply with the following regulations:
?a) The pipeline layout should be reasonable and the direction should be horizontal and vertical. When the brick-concrete structure is required not to be horizontal or vertical, it should be constructed according to the requirements of property management.
?b) Pipes must not be installed close to power sources.
?c) The pipe fittings exiting the wall must be connected and sealed, and the hemp silk and raw tape must be wound in the same direction as the pipe fittings are tightened. d) A gate valve must be installed in connection with the water feeder to facilitate maintenance. Process standards should comply with the following requirements: a) Pipes and fittings meet design requirements.
?b) The exposed concealed pipes are installed firmly without shaking. c) The shortest straight-line distance from the power cord is 200mm.
?d) The cold water pipes use Φ25 water pipes to ensure water flow and pressure, and the hot water pipes use special Φ20 hot water pipes. e) There should be no damage on the surface of the cold and hot water pipes. If they are damaged again, the water pipes need to be replaced.
?2 Drainage pipeline reconstruction
?Construction procedures and methods should comply with the following regulations:
?a) Check whether the original pipeline is smooth, and ensure that it is smooth construction under the premise.
?b) Make grooves and cut materials according to design requirements, leave a certain slope according to the water supply direction, and then connect the drainage pipe. c) When the floor drain pipe and the main drainage pipe are installed in parallel, the floor drain pipe should be connected to the upper opening of the main drainage pipe in advance to avoid leakage in the opposite direction.
?d) All pipe joints need to be coated with special sealant on both sides.
?e) Conduct a drainage test to confirm that there is no leakage and that water is flowing smoothly, perform waterproofing work on the pipeline sealing groove and seal the drainage pipeline. Technical key points should meet the following requirements:
?a) The drainage slope should be reasonable, the water should flow smoothly, and there should be no accumulation of water or blockage. 3 Toilet installation
?Construction procedures and methods should comply with the following regulations
?a) Anti-leakage treatment should be done around the sewage pipe.
?b) Trial-install the toilet, find the fixed point according to the trial-installation position, and punch holes at the fixed point (or fix it with sealant).
?c) Apply sludge to the bottom of the toilet and 200mm around the sewage pipe.
?d) Install the toilet according to the trial installation position. Make a positioning hole at the bottom of the toilet and fix it with expansion bolts (or sealant).
?e) Connect the water tank to the water source, flush it and check whether the water is flowing smoothly.
?f) Apply silicone glue between the toilet and the floor to seal it.
?Technical points should comply with the following regulations
?a) Select sanitary ware that is suitable for the location of drainage pipes and drainage outlets.
?b) Anti-leakage projects around sewage pipes.
?c) After the toilet is installed, flush it in time to prevent sludge from staying in the sewage pipe and causing poor sewage discharge.
?d) The toilet must not be fixed with cement mortar to avoid being unable to remove it for repair.
?Workmanship standards should meet the following requirements
?a) The installation is firm and there is no shaking when shaking by hand.
?b) Smooth drainage and no retention.
?c) The seams are tight and there is no leakage.
?4 Bathtub installation
?Construction procedures and methods should comply with the following regulations
?a) Check whether the size and placement dimensions of the bathtub are accurate.
?b) Check whether the drainage hole is consistent with the bathtub drain outlet.
?c) Connect the drainage hole at the appropriate location to the hidden pipe of the bathtub drain outlet.
?d) Trial-install the bathtub. After the location is appropriate, build supporting peripheral walls or install special bathtub brackets according to the trial-installation position.
?e) Fill the supporting peripheral wall with fine sand (or perform anti-corrosion treatment on the bathtub bracket).
?f) Install the bathtub and fix it with silicone glue around it.
?g) Connect the hidden drainage pipe to the bathtub drain outlet.
?Technical points should comply with the following regulations
?a) The drainage pipes, drainage holes, and faucets should be in a straight line.
?b) Fine sand should be filled in the supporting wall to prevent damage to the bathtub caused by water pressure and the weight of the human body, causing harm to the human body. c) Use silicone glue for bonding to prevent the inconvenience caused by cement fixation when clogging. The process standards should meet the following requirements: a) The installation is firm and there is no shaking when shaking. b) Tap the bottom of the bathtub gently to see if there are any hollows.
?c) The silicone glue is tightly bonded without leakage.
?Electrical installation engineering
?Strong line installation
?Construction procedures: Determine the location of electrical appliances, lighting and other equipment, determine the specific location of the power socket, And the direction from the distribution box to the socket. Slot the wall or route the wires on the ground, dig switches, socket holes, and PVC pipelines and fix them with pipe clamps and copper wires (the internal wires in the ceiling are routed straight and neatly).
Install the junction box, fix the junction box, and use a megger or multimeter to test the power on/off and insulation resistance values. Wrap the thread ends, wrap them around and put them into the pressing box. The construction method should comply with the following standards
?a) The wire trough must be constructed with painted lines or elastic lines to ensure that it is horizontal and vertical. The turns and joints of the right-angled wire pipes must be sleeved with joints. Use glue to connect.
?b) During wire laying, when the length of the wire pipe exceeds 15m, or there are two right-angle bends, a junction box should be added, and the wires of the same circuit should be inserted into the same wire pipe. The total number of wires in the pipe should not exceed eight, and the total cross-sectional area of ??the wires (including insulation sheath) should not exceed 40% of the cross-sectional area in the pipe.
?c) Strong and weak currents should be routed through pipes respectively. No joints are allowed in the wire pipes. The joints must be in the junction box. The parallel distance between strong and weak wires and natural gas, hot and cold water pipes should not be less than 250mm.
?d) Capacitors and rectifiers are not allowed to be installed in the ceiling of wooden keels. If installation is necessary, a special metal box should be installed for protection. e) The load current of each one-way circuit should not exceed 15A, and automatic air switches should be used for control and protection; the capacity of the socket should be suitable for the negative charge, and there should be a leakage protection device.
?f) The socket panels for power supply, telephone, TV, etc. in the same room should be on the same horizontal line, and the height difference should be less than 5mm (the height of the sockets behind the TV cabinet can be determined according to the actual situation). Generally, the height of the power socket is 300mm (bottom to ground) or 1200mm. The height of the air conditioning cabinet socket should be between 1800-2200; the switch height should be 1200-1300mm. g) Moisture-proof sockets should be installed in kitchens, bathrooms and other humid water sockets. The switch should be installed on the wall on the opening side of the door.
?Weak line installation
?The construction method should comply with the following regulations
?a) It must meet the designer’s layout requirements. If there is no requirement in the design, it should be Construction will be carried out based on the layout and positioning confirmed on site. b) Opening pipe trough, fixing method, wiring, etc. are basically the same as those for strong electricity.
?c) When connecting 8-core computer cables to voice and data dual-mode sockets, they should be color-matched and use a special plug gun to insert the wire ends into the V-shaped secant clamp of the wire base.
?d) When the TV *** uses a wireless socket board to connect a coaxial cable, the casing core screw should be tightened to avoid affecting the received signal. Technical key points should comply with the following regulations
?a) The pipelines of strong and weak current systems should be shielded or separated as much as possible to avoid electrical interference, and the terminal locations should be reasonable and practical. b) No joints are allowed for signal wires penetrating into the pipe, and the entire wire should be laid in a weak current box. c) Reserve more than 150mm for the socket board lines in the information junction box and the antenna socket box. d) The junction box and the wire tube should be of the same quality as iron and iron, plastic and plastic, and cannot be used interchangeably. e) The cassette protrudes from the wall by 1mm.
?f) The minimum separation between weak wires, especially weak sockets and high-power electromagnetic interference, fluorescent lamps, etc. should be more than 300mm.
?3 Lighting installation
?Construction methods should comply with the following regulations
?a) Before installing large lighting fixtures, embed hanging parts in the top concrete and ceiling keels No chandelier pendants are allowed. Metal expansion bolt hangers can be used to install general chandeliers.
?b) When the weight of the ceiling lamp exceeds 1000g, expansion bolts should be used to install it on the original plan; if the weight is below 1000g, a supporting wooden frame can be added to the keel frame for installation.
?c) Decorative light troughs are equipped with fluorescent lamps, and insulating and heat-insulating materials should be placed underneath, and the wires should be passed through insulating and flame-retardant hoses.
?d) The installation height of wall lamps is 1800mm, the installation height of floor lamps is 300mm, and the installation height of bedside lamps is 1400mm. e) Desk lamps and floor lamps are powered by sockets, and the metal shell of lamps below 2400mm must be protected from the grounded neutral line. f) When installing spotlights and track lights, the guide rails and brackets must be basically installed firmly. The technical points should meet the following requirements:
?a) The wiring inside the lamp should not be less than 0.4mm2 wire. Before both ends of the cord are connected to the lamp socket, they should be flattened and tinned to ensure good contact between the cord ends and the screws.
?b) For grounding protection of lamps and lanterns, there must be a special grounding screw for the lamp and be tightened with a spring washer. The workmanship standards should meet the following standards
?a) The lamps and lanterns have complete accessories and no mechanical damage, deformation, paint peeling, lampshade breakage, etc.
?b) The lighting fixture is in the correct position, installed firmly and upright; there should be no less than 2 bolts or screws to fix the lighting fixture.
?c) The lamps and their control switches are normal, and each lighting circuit should not have more than 15 lights (excluding the lantern circuit, and has 15A overcurrent protection). Maintenance Electrician 2023 Personal Work Plan Collection 7 Parts 3
?In the new year, I will do my job well. It has been more than three months since I came to the company. During this time, I have felt that the company's humanistic environment is very good. Regardless of business, logistics, engineering and technical personnel, everyone has a centripetal force, and their behavior is relatively harmonious and low-key. It is the leaders of various departments who pay close attention to the engineering and technical personnel when they go to the construction site.
?Through this period of work, I got along very well with every employee of the company. Everyone helped each other at work. When looking for tools and spare parts, they could provide and find each other. When the computer encountered problems Every time, we can provide timely solutions. I am very grateful for everyone's help. During this period, I learned the concept and architecture of dual-machine hot backup, simple hard drive data retrieval, projector installation precautions, and the use of words in program and construction plan writing needs to be further improved. After working in engineering for many years, I am well aware of the difficulties of on-site work. It is necessary to communicate with customers and understand their needs and requirements in order to do a good job. The project manager needs to communicate with manufacturers, agents, internal sales staff, procurement, logistics, department managers, etc. to understand the characteristics, performance, arrival date, transportation, reserve funds, construction tools, installation personnel, etc. of the equipment. Project managers must take the initiative to do each of the above things, grasp every link in a timely and accurate manner, summarize and utilize this information, and archive it electronically in order to complete each project.
?In 20xx, complete every task assigned by the company, work in an orderly manner, do your job well and conscientiously, continue to learn advanced technology, and master a new skill in the new year New skills, whether it is company training or taking skills exams by yourself, etc., because I took the second-level construction engineer exam before, although I failed, but through self-study books, I mastered and understood some knowledge about weak current, and at the same time gained in practice A good internship opportunity
? As I grow older and gain more experience in on-site construction, I hope to learn more about management in the new year of work. Personnel management is the most difficult thing. Everyone has their own ideas. I think it is effective to manage people well through different methods and means, and to manage people well based on the principles of convincing people with reason and being honest.
?At work, we should all work together to do every job of the company well, reduce or eliminate hidden dangers, think about problems in advance and take all aspects into consideration, and be neither humble nor overbearing when communicating with customers. While not affecting the company's interests, we should think from the customer's perspective, with more sincerity and communication and less misunderstandings and troubles. Make preliminary preparations before project construction. During the construction process, keep equipment instructions, certificates, arrival list sign-offs, acceptance forms, etc., and keep electronic records and archive them after returning to the company. Details are the key to success or failure. Every detail can make you fail. Always keep this keyword in mind, and always think of details in everything you do to determine success or failure.
?I hope that the company’s performance will be better in the new year and its performance will be booming. Only when the company’s performance increases can we achieve personal benefits. Maintenance Electrician 2023 Personal Work Plan Collection 7 Parts 4
Our electrician team will continue to work hard and overcome difficulties as always. Our team will work from the following aspects.
?1. Business skills learning
?On the basis of the past, our class will continue to strengthen the learning of business skills in the team, combining theory with practice, learning from each other between groups, and people from each other. Learn from each other and apply theoretical knowledge into practice. There is no end to learning, apply the learned skills to production, service and production.
?2. Equipment maintenance
?1. Maintain, maintain and add lubricating oil to the power equipment in each workshop.
?2. Conduct safety inspections on electrical circuits and electrical components, and maintain and repair defective and faulty components.
?3. Clean the dust of each power distribution cabinet regularly to ensure that the electrical components are in good contact and free of dust.
?4. Regularly inspect the cooling facilities of each power distribution room, distribution cabinet, and transformer to ensure good ventilation and cooling.
?3. Take countermeasures during peak periods of electricity consumption
?In response to the phenomenon that our normal voltage is low, we will take countermeasures and improve reactive power compensation internally. Arrange and adjust the startup sequence when starting large equipment in each workshop. Communicate with the superior substation in a timely manner to increase voltage and other tasks. Ensure the supply of electricity for our normal production.
?IV. Safety aspects
?Through the third-level safety education, the team members have improved their awareness of safety. Through learning safety before and after class, analyzing and summarizing safety accidents, improving Be aware of safety and avoid reckless and illegal operations. "Three no harms" should be kept in mind by every team member. Maintenance electrician's 2023 personal work plan collection, 7 chapters and 5 chapters
?In order to speed up the safe, fast and efficient operation of mechanical and electrical equipment, improve the equipment operation rate; ensure the smooth completion of production tasks. In order to continuously improve the operating skills of employees in various positions in the electromechanical system of our team and strengthen the safety awareness of electromechanical personnel, the following work plan has been formulated based on the characteristics of each position in the electromechanical system of our team.
?1. Strengthen equipment management
?For advanced equipment to run smoothly and achieve maximum effectiveness, the best management must be implemented. Innovation and model innovation in equipment management make equipment management a promoter of safe and efficient production in coal mines.
? Plan to further standardize the maintenance of electromechanical equipment, implement chartering, and achieve "three guarantees and four guarantees", that is, personnel, equipment, and tasks; use, management, maintenance, and Troubleshoot the package and ensure that the charter responsibility system is in place. Implement the eight-character maintenance policy of “lubrication, fastening, cooling, and filtration” for mechanical equipment. Focus on equipment operation management, strengthen on-site management, regularly analyze equipment operation conditions, summarize the causes of electromechanical accidents, strengthen inspection management, and improve the level of electromechanical management.
?2. Strengthen equipment management
?"If a worker wants to do his job well, he must first sharpen his tools. If a king sharpens his tools, he must first obey them." It talks about the enterprise To maintain the strongest core competitiveness, we must have advanced equipment. To make advanced equipment run smoothly and maximize its effectiveness, we must implement the best management. Innovation and model innovation in equipment management make equipment management a promoter of safe and efficient production in coal mines.
? It is planned to further implement maintenance standards for electromechanical equipment, and plans to issue standards for the integrity of electromechanical equipment and maintenance specifications for electromechanical equipment, so that the quality of electromechanical equipment chambers will meet standards.
?3. Strengthen technical management
?Strengthen mechanical and electrical technical management, strengthen the mining face power supply design first and then construction, and then the acceptance process.
?Strengthen transportation technology management work, strengthen the design first, then construction, and transportation maintenance quality of the transportation system.
?4. Strengthen the construction of quality standardization
?Standardize the quality of mechanical and electrical chambers, ventilation chambers, mechanical and electrical systems, and transportation systems.
?2. Plan implementation goals
?1. Strengthen the cohesion and centripetal force of enterprise employees through human resource management, improve the work enthusiasm and sense of belonging of mechanical and electrical employees.
?2. Strengthen equipment management, improve equipment utilization, prevent the failure of underground electromechanical equipment, improve equipment integrity rate, and extend the service life of electromechanical equipment.
?3. Strengthen electromechanical technical management, improve electromechanical management safety management awareness, strengthen electromechanical engineering technical support capabilities, and improve the ability of electromechanical equipment to withstand mine disasters.
?Daliuta Coal Mine Continuous Mining Team 6
?A collection of 7 chapters of the 2023 personal work plan for maintenance electricians on May 2, 20xx
?1. Cooperate with the city company to complete the electrician training for grid entry operations
In order to improve the technical quality of electricians for grid entry operations, maintain the safety of the power supply and consumption public, and ensure the safe and stable operation of the power system, in accordance with xx City In the second half of the year, we will prepare for the unified deployment of training for electricians working on the grid. The Electric Power Office is responsible for the registration and daily supervision and management of electricians working on the grid in the region. In order to do this work well, a preliminary understanding of the situation of electricians, self-managed households and enterprises in the jurisdiction was carried out, and the work arrangements of the Municipal Electric Power Office were conscientiously implemented. Strictly implement the relevant management measures and registration standards for electrician training for grid entry work, and coordinate the registration and training work in our district. Relevant enterprises, institutions, and relevant departments are required to attach great importance to it, carefully organize and implement it in accordance with the unified deployment of the district, and concentrate on fully cooperating to complete this task. item of work.
? 2. Ensure safe operation during the peak periods of electricity consumption in summer and winter
? In previous years, summer and winter were the peak periods for electricity consumption. Electricity consumption by enterprises and residents increased significantly, and lines There are many failures such as power outages, short circuits, and power cuts, causing great inconvenience to businesses and residents. In order to ensure normal and safe operation during peak periods and reduce the impact of power failures, the Electric Power Office actively cooperates with the power department, formulates emergency plans in advance before the peak period of electricity consumption, and cooperates with the Municipal Power Supply Bureau Carry out the transformation of electric power facilities related to the "Peak Electricity Smoothing Project". In conjunction with the advancement of the dilapidated house renovation project in our county, we will work with the Danger Renovation Office and other departments to cooperate with the Municipal Power Supply Bureau to formulate power supply plans for the dilapidated house renovation project and communities in our county, so as to provide power services for the county's environmental construction.
?3. Create a harmonious relationship between power supply and use, and create a new pattern of power management in our district
?In order to strengthen the supply and use of power in our county and ensure the supply and use of electricity meet the needs of both parties, maintain the order of power supply and consumption, actively cooperate with relevant law enforcement agencies, and play their due roles in accordance with their respective functions. The power supply department and law enforcement department should make a plan for power maintenance and law enforcement at the beginning of the year and establish a responsibility system; they should set up a management office accordingly, designate a dedicated person to take charge, set up a power supervision team, conduct regular inspections, and eliminate hidden dangers; proactively strengthen cooperation with the district power management office Contact to form a set of supervision system in the power management work of our county. The power supply department is required to do a good job in the business of power supply and use, provide relevant business assistance to users, and provide it to users with guaranteed quality and quantity. Law enforcement departments play a supervisory role and cooperate with the power department in investigating and handling power disputes, electricity theft and other issues. Other relevant departments should support each other and jointly create a new pattern of power management in our county.
?4. Promote energy-saving products, save resources, and reduce energy consumption
?In order to alleviate the tense situation of electricity and energy supply, all enterprises and institutions in the county, especially Key energy-consuming units should select some qualified units to continue promoting energy-saving products. Each energy-consuming unit must actively find ways to eliminate unreasonable phenomena in the process of electricity consumption and reduce losses caused by unnecessary energy consumption. In the second half of the year, we will continue to promote mature projects such as electric heating and electric thermal storage (cooling) in dangerous renovation and municipal construction, boiler renovation and enterprise technological innovation projects, so as to improve the county's domestic electricity, production electricity and lighting. Electricity-using enterprises and individuals should increase publicity efforts, introduce and promote advanced technologies, and promote low-consumption electricity consumption in our district.
?5. Further strengthen the protection of power facilities and ensure the safe operation of power facilities
?According to the requirements of the "Regulations on the Protection of Power Facilities", the protection of power facilities is implemented by the power management department and the public security The principle of integrating departments, electric power enterprises and the people. The Electric Power Facilities Protection Office must give full play to its functions and intensify inspection efforts, especially focusing on the ongoing construction projects and hazardous renovation projects in our district, and inspect the protective measures and illegal activities involving electric power facilities during construction. In addition, all relevant departments are responsible for their respective responsibilities and perform their duties to resolutely crack down on behaviors that endanger power facilities and ensure the safety of power facilities. In the second half of the year, the Electric Power Office plans to carry out publicity and education work on the protection of electric facilities, and publish relevant policies on the protection of electric facilities on the district information network to further enhance the understanding of the protection of electric facilities, expand its influence, and strengthen the protection of electric facilities. Maintenance Electrician 2023 Personal Work Plan Collection 7 Chapter 7
?1. Increase campus network construction. Improve the construction of campus network platform and strengthen network applications.
?2. Strengthen the teaching management of xx courses. Information technology teachers are required to actively explore and build inquiry-based teaching structures, update educational models and methods, cultivate students' interest in information technology, and cultivate students' good information literacy.
?3. Improve the management system for the use of audio-visual equipment and multimedia classrooms in each class, and improve various audio-visual records, such as teachers’ use of multimedia records. Improve the utilization rate of audio-visual equipment and optimize classroom teaching.
?4. Further focus on regular audio-visual training. This semester, the construction of campus network platform and website uploading of materials will be the main content to improve the use of audio-visual education by teachers, so that the Internet can truly become an assistant in school education and teaching.
?5. Actively promote the integration of information technology and subject teaching. Multimedia classes should be included in open classes as much as possible to improve the ability of all teachers to integrate information technology and subjects, so that most teachers can apply information technology to In teaching reform, promote the process of new curriculum reform.