Faucet is essential in our home life, which brings convenience to our daily life. However, if there is a problem, it needs to be repaired or replaced in time to avoid affecting water use. So how do you turn on the tap?
First, how to unscrew the faucet?
1. Close the water valve, find the small screw behind the faucet and unscrew it. 2. Unscrew the handle screw of the faucet. This process should be light so as not to damage the water pipes. 3. Hold the water pipe with one hand and turn the wrench with the other. 4. Install a new faucet according to the reverse process and lock the screws.
Second, what should I do if the faucet rusts and won't twist?
1. If the faucet is rusty and can't be used normally, it needs to be replaced. At this point, you should first close the valve of the faucet, and then try to twist the faucet. If you can unscrew the faucet, it means that the rust layer has been destroyed, so the disassembly will become much easier. But don't use too much force to prevent the water pipe from being damaged.
2. If the faucet can't turn, you can use kerosene, drop a few drops on the faucet thread, and then wait for a period of time to let kerosene fully penetrate into the threaded hole to increase lubrication. At this time, it is very simple to turn the faucet. If there is no kerosene at home, you can also use vinegar or engine oil instead.
3. Prepare a pot of freshly boiled water and pour it slowly along the external thread of the faucet, so that it is easy to make the faucet slightly loose due to thermal expansion and contraction, and it is also easy to tighten. If you still can't turn on the faucet, you need to consider sawing off the rusty part with a saw.
I'll introduce you here first about how to unscrew the faucet and what to do if the faucet rusts and doesn't twist. Are you clear? It is not difficult to unscrew the faucet, as long as you pay attention to a few details, you can easily get it without destroying the water pipe.
Enter the area and get the decoration quotation for free.