Three-point positioning with double neps
This is mainly a fishing group and method that can fish with ultra-small wire ring rocker (1. 1 mm wire ring, 4.5-5.4 m rocker, fishing depth over 8 m). This paper introduces a three-point positioning principle of double neps method, which can make the fishing distance and fishing depth more accurate.
02
operation sequence/order
13 step
◆? 1. Choose a lighter and harder rocker with an aperture of1.1mm. ..
◆? 2. Small splayed ring and movable floating seat; Lightweight spinning wheel
◆? 3, eating lead drift is large, according to the depth of fishing distance, the farther the bigger, the deeper the bigger, you need to verify it yourself.
For example, the following float can catch more than 15m, and a seven-star float can be installed to expand the visual range. This float is usually used to catch earthworms. Corn kernels are not easy to unhook.
This buoy can catch 10 meter. This float is usually used when fishing for surface bait, which is more sensitive than the buoy with enlarged tail.
Then there is an enlarged tail, which can be used for drifting 10m or more, and fishing for earthworms, corn, wheat, etc.
◆? 4. Narrow the ring of the buoy seat with tweezers to avoid slipping into neps. The buoy seat can be directly installed, or the method of 8-shaped ring+buoy seat can be adopted. It is more complicated, but in the water, the activity of the buoy is improved, and it is easier to find the positioned neps along the main line.
◆? 5. Pass the main thread through the ring of the sand pole, pull it out, and start knotting. One * * * is two neps. Use the floating feet of the buoy as support. (For the convenience of demonstration, a road wheel is used instead, with a ready-made fishing line on it. )
◆6. Make neps with cotton thread or braided thread about 1.0. Put the main thread along the floating foot and tie it with a more eye-catching braided thread.
◆? 7. Pull the thread end of the braided thread and wind it in the direction of the hand. The end of the thread passes through the hole of the braided thread and is gently pulled. Do not tighten.
◆? 8. Pull out the floating feet and open the neps. Tighten it again (the yellow line is not well typed, and the color of the shot line has changed after retyping). Adjust according to the size of the line. If it is too tight, it will hurt the thread; if it is too loose, it will slide easily and the positioning will be unstable.
◆? 9. Tie two neps in turn, install the sliding coordinates, add an 8-shaped circle, and install the lead seat. Install the lead base.
◆? 10, you can choose to use the main hook directly, or you can add an 8-character circle to catch the double line. Of course, the ultra-small ring passing through the rock pillar is very smooth.
Special note: you can use small space beans instead of neps! The club sells super-small space beans, with a line diameter of 0.2-2. 0
The principle of "slipstream" fishing method is shown in the attached figure:
Neps 1 function: fix the depth of fishing shed; The function of neps 2 is to fix the distance of fishing points;
The float made by this method floats up to the nep 1 due to buoyancy after launching and is blocked, that is, the depth of the fishing shed is set. Throw the fishing group farther than the fishing point, turn on the spinning wheel and let the line go out freely without stopping to lift the rod slightly.
Remove neps and fix at 2 places. You can determine the distance. After the depth and distance are determined, put away the fishing rod according to the main line. The buoy will automatically follow the main line and locate the fishing point. With this method, as long as you throw the fishing rod in front of the fishing point accurately, you can locate it accurately!