1, that is, cut old books and newspapers into pieces, add appropriate amount of alum, cook them into paste with clear water, embed them in the crack of solid wood, and dry them firmly.
2. It is simple and economical to mix wood chips and white glue, embed them in gaps, and polish them with sandpaper after a day and a night. If the hinge is loose, it is advisable to use chopsticks-thin wood, sharpen it, coat it with white glue, put it in the hole of the wooden screw and hammer it in. After hammering in, break the batten, and then screw in the wooden screw again to tighten it.
In addition, if the solid wooden door is used for a long time, the drawer may get stuck. In this case, you can pull out the drawer, turn it over, and burn candle oil on the drawer path with an electric soldering iron to let the oil penetrate into the wood. In the same way, burning candle oil in the corresponding aisle of the table and cabinet can reduce the wear and tear of the drawer of the solid wood door.
Wooden door deformation
Wood products are flexible, so the requirements for air and environment are higher. When the humidity or temperature in the air is too high or too low, it will have a certain impact on wood products. The increase of humidity in the air will increase the moisture content of wood, and if there is no corresponding treatment, the wooden door will be deformed or cracked. If the wooden door is slightly deformed, it can be corrected by hand in time. If there is serious deformation, you need to contact the after-sales department immediately to return to the factory to avoid serious problems caused by self-repair.
Wood door foaming degumming
During the process of making or installing wooden doors, uneven gluing will occur, and in the later use, it will expand when heated, so the surface will bulge or bulge. Don't squeeze hard when this happens, otherwise it will cause damage and cracks in the wood skin. If this happens, it should be polished and oiled in time. If the situation is serious, it must be returned to the factory to re-order production.
The wooden door is cracked or collided.
Wooden doors often crack because of weather and environment, or improper use in use. If the wooden door is slightly cracked, it can be repaired with toothpaste. Apply toothpaste to the cracked surface, dry it, coat it with the same color as the wooden door, and then coat it with nail polish. The cracks that appeared some time ago will disappear. If there are serious cracks, please have them repaired by professionals.
There was a crack between the door cover and the wall.
When the wooden door is in normal use, there will be a gap between the door cover and the wall. If the wooden door is light-colored, this gap will be particularly obvious. The reason for this problem is that there is no accurate measurement during installation and measurement. In this case, if the wooden door is dark, there is no need to deal with it. If it is light, it needs to be repaired with white glass glue.
Experience from Baidu