2. Specific stop mode: natural stop. The terminal area is flat and open, and it can stop naturally when there is flat ground or reverse slope. When it is slow (gentle slope), stop with large plow downhill technology. At this time, it is necessary to increase the separation angle of the two skis, strengthen the vertical edge, straighten your legs, board the skis with your inner feet, and board the skis with your double heels if necessary.
3. When driving fast, use a sharp turn to stop around the mountain road. Before parking, slow down by turning with two parallel plates, and finally stop by turning sharply around the mountain. The most common way for beginners to slow down and stop is plow technology, which is simple, stable and safe. Middle and senior skiers often use double-board parallel turning technology, which can stop in a fast way.
4. Relax the upper body, hold the head of the snow pole at the hip height in front of you, the snow pole hangs behind you, and the body center of gravity is inside the front foot, so you can't sit back. When sliding, make the tail of the double board Zhang Kaicheng "V" shape, that is, the figure of eight, and increase the resistance to slow down the speed of its own decline, and finally stop.
Extended data:
Introduction of snowboarding deceleration and braking skills;
1, slow (gentle slope) stop using large plow downhill technology. At this time, it is necessary to increase the separation angle of the two skis, strengthen the vertical edge, straighten your legs, board the skis with your inner feet, and board the skis with your feet if necessary.
2. In fast driving, stop around the mountain by using sharp turn technology. Before parking, slow down by turning with two parallel plates, and finally stop by turning sharply around the mountain.
3. The most common way for beginners to slow down and stop is plow technology, which is simple, stable and safe. Middle and senior skiers often use double-board parallel turning technology, which can stop in a fast way.
4. On the same ski run, put on ski equipment, and your body is in a plow posture. If you want to turn left, move the center of gravity to the right side of your body, bear the weight on your right leg, and press your knees inward, so that your right snowboard will stand on the edge and push it outward, and your body will turn left slowly. Turn this technical point to the side and your body will turn right.
5. In the plow turn, one of the snowboards bearing the weight is the driving board and the other is the driven board. The greater the downward pressure on the driving plate, the smaller the turning bend, the smaller the downward pressure and the larger the turning bend. If two skis become driving boards, then the taxiing process is a continuous plow turn.
6. When changing the turning direction, the change of body center of gravity and the change of left and right leg force are carried out at the same time. Other postures are the same as plough downhill posture. Ploughing is suitable for terrain with not too steep slope. Because of its simple technical essentials, it is very suitable for beginners.
References:
Baidu encyclopedia-new skiing