The charging port is loose. How can I make it tight?

If the charging head is loose, first check whether there is dust on the interface of the mobile phone, because the charging port is open, and too much dust can easily lead to problems such as the charging cable is not tightly inserted and easy to fall off.

The solution is to poke the card gently at the quasi-interface, clean up the dust and plug it in, which will become very tight. If the buckle inside the interface is loose, you need to go to the maintenance point to disassemble the motherboard and replace the tail plug. If the data cable interface is loose, the easiest way is to replace it with a new data cable.

Precautions:

When the phone is charging, the screen shows that the charger is connected, and then it shows that the charger has been pulled out, indicating that the charging port is loose. If the data cable is used for too long, the port will be deformed.

If it is an Android data cable, there are two rows of small hooks on the data cable interface. If it gets stuck in the connector, it won't plug in tightly. Just pick the buckle with a needle. But this method is not a long-term solution, and the data cable also has a service life, so it will be more convenient to change a new data cable.

If the charging port on the mobile phone is loose, it is generally due to excessive force during charging, resulting in loose pins, which need to be repaired with a soldering iron. Ordinary people do not have this technology, it is best to carry out after-sales maintenance, replace the tail plug, seriously damage or even replace the motherboard.