It is impossible for the wire loop of the front rod to pass through the space bean. I personally recommend two ways to use the wire group: 1. Take your 4.9 length as an example. After the wire is drawn out, tie a "horseshoe buckle" and use Usually, for Taiwanese fishing rods with a size of 3.6 or below, the finished fishing group is connected to the reel line using the red tassel on the top of the hand rod. The binding method is the same as the method of connecting the hand rod. This can prevent you from accidentally breaking the rod slightly when taking in the line, because the knotted joint is still 4.9 minus 3.6 away from the rod tip. However, it should be noted that the water depth at the fishing point must not exceed the length of the finished line set. 2. Directly assemble the fishing group on site using the reel line. The advantage is that the rod will not be broken due to the retrieval of the line, and it is not limited by the water depth of the fishing point. The disadvantage is that the main line (reel line) is usually too large, which will affect the sensitivity of the fishing group. Of course, since we are going to Yekuben Big Fish, we can also solve this problem comprehensively. The other thing is that you have to throw away a set of space beans every time.