1. Preparation for installation of door opener: First, check whether the flexibility of gate opening and closing is good; Then it is necessary to determine the internal ground drop corresponding to the corresponding working range of the portal crane; Need to determine the configuration power of portal crane.
2. Determine the installation position of the door opener: First, we need to fix the relative installation position of the two doors when they are closed, and the corresponding inner margin of the two doors should be greater than 100mm, so as not to affect the manual door opening.
3. Adjustment of the height of the door opener mounting fixing plate: The corresponding mounting height of the fixing plate is set to determine the position of the door opener. There are two ways. When installing the fixed plate, we can push the gate to the lowest walking range and move the corresponding fixed plate to a position 60- 1 10 mm above the ground for marking. Another method is similar.
4. Installation and wiring of door opener: This link is an important link in the installation of door opener, because all the controls are here.
First, make an opening on the bottom frame of the gate for the power supply line to enter and exit. Please refer to the drawing for the corresponding connection.
5. Install and fix the door opener: When fixing the door opener, pay attention to the connected wires. It should be noted that the color of the logo corresponding to the terminal board in the controller should be consistent. The next step is to check and switch to manually pushing the door back and forth. At this time, it is necessary to keep the machine running freely with the ups and downs of the ground.