Introduction to semi-knot: the basic knot in all knots
Usage: to prevent slipping, or as a temporary way to prevent the thread from falling off when the end of the rope is open.
Disadvantages: When the knot is too tight or wet, it is difficult to untie it.
Eight-character knot introduction: The play is simple and easy to remember.
Usage: It can be used as a temporary or simple stop and braking point on the rope.
Features: even if the two ends are pulled tightly, they can still be easily untied.
Usage of flat knot: Tie the two ends of the same rope together. Suitable for connecting ropes with the same thickness and material; But it is not suitable for ropes with rough and smooth surfaces.
Features: once the winding method is wrong, the result may become an incomplete slipknot, and the knot will spread when stressed. If the knot is pulled too tightly, it will not be easy to untie; However, if you hold the end of the rope with both hands and pull it hard on both sides, you can untie it easily.
Secret: Left and right, left and right.
Description of Knot: Known as the King of Knots, it is the most popular knot in the world and is often used in various outdoor sports, even in all walks of life or daily life.
Usage: When the rope is tied to other objects or forms a circle at the end of the rope, it is characterized by easy knotting, easy unfastening, high cooperation and warranty safety, wide use and various types.
Introduction to double knots: the beginning and end of other knots
Usage: usually suitable for articles with equal stress at both ends, and suitable for horizontal stretching.
Features: extremely safe, but if you only apply force at one end of the rope, the double knot may be confused or loosened.
Brief introduction of three sets of knots: the function is the same as that of double sets of knots, but it is stronger.
Usage: Suitable for vertical traction.
Others: also known as turning knot, Magnus knot, Rachel knot and stopping knot.
Introduction to fisherman's knot: This knot is very easy to tie, but it is difficult to untie.
So try to avoid using it on some ropes with good texture, and it is not good to use it on ropes that will be tightened, because it is difficult to untie after tightening.
Usage: Connect two ropes together, usually hard and soft.
Introduction of Prussian Knot: You can move the knot up and down on the rope at any time.
Usage: used to arrange all kinds of stay cables.
Features: The tightness of the rope can be adjusted at any time.
The purpose of knot contraction is to shorten the long rope and avoid cutting it short because it is too long. This method can also be used to strengthen the protection of the easily worn parts of the rope.
Features: If the rope is too loose, the knot will easily loosen and lose its function.
Knot application: press two ropes together.
Features: easy to untie
Brief introduction of pulling wooden knot/tying wooden knot: There is a circle that can be adjusted at will.
Use: Tie and drag wood and things like that.
Features: Although it is a convenient and reliable knot, it must be pulled, otherwise it will loosen and lead to danger.
Knotting method of bracelet rope
First, put the ropes at both ends side by side vertically, wrap them around one end of the rope, and then fold the coil. The rope tail at the left end of the rope goes down around the rear right end. After passing through the winding circle from above, the rope tail at the right end passes through the winding circle from above, and the rope tail at the left end tightens around the middle of the second circle. Method of knotting the rope of the bracelet When knotting the rope of the bracelet, you can first put the ropes at both ends of the bracelet side by side vertically, then make a circle in the middle of the rope at one end, and then fold the coil wound in the previous step upwards. Wrap the rope tail at the left end around the right end from below, and then pass through the winding circle from above. Then the rope tail at the right end winds around the left end from above, and at the same time passes through the winding circle from below. After winding the lower part of the tail of the left rope in the middle of the second turn, finally, hold the tail of the rope and gradually tighten it outward, so that the bracelet rope can be woven into a button knot.
Hanging rope knotting method
The knotting method of the hanging rope is as follows:
Tools/materials: pendants, ropes, crochets.
1. Prepare 1 pendant and rope in advance.
2. Pass through the small hole of the pendant rope pendant. If it doesn't wear well, it can be assisted by crochet.
3. Pass the other end of the rope through the circle.
4. After passing through, screw up the upper circle and turn it into a circle.
5. Pass the other end of the rope through the new ring.
6. Pull the lanyard hard and the pendant will be knotted.