How to typeset tile paving

800x800 floor tile layout;

1, spread in the center of the aisle, with 10 cm on both sides, with many gaps in small bricks;

2. Divide the aisle evenly, with a small gap of 8 cm to the kitchen door;

3. Starting from the inside of the balcony sewer, the corridor is divided into two or eight points, and there are many long gaps on the right wall;

4. Starting from the outside of the balcony sewer pipe, the corridor is also 28 points, but it avoids the longer wall on the right side.

Matters needing attention in tile paving and typesetting

1, before paving, you should use a ruler to measure the length of the wall or ground, and then try to avoid two-thirds phenomenon in the process of paving. When doing this, try to avoid this phenomenon and try to choose some small bricks made of lines.

2. The bathroom area should be tiled, and the gap between wall tiles and floor tiles needs to be kept unobstructed, so wallpaper should be laid first, and then wallpaper should be laid; In addition, before paving, measure the length and width of the wall and ground, and then make typesetting in advance.

There is no problem in laying floor tiles at the gate. There will be many first-row tiles when entering the room at the small entrance, which will also affect the appearance. What we can do is to typeset in advance to minimize this situation. There are several problems in the layout. First, in order to take care of it, it is possible that not all the first doors are inside, and it is impossible to close all the doors of the house.